Self-Leveling Suspension; Specifications; Fastener Tightening Specifications - Audi Q7 2007 Repair Manual

Audi Q7 2007 ➤
Suspension, Wheels, Steering - Edition 01.2014
43 –

Self-Leveling Suspension

1

Specifications

⇒ "1.1 Fastener Tightening Specifications", page 208
1.1

Fastener Tightening Specifications

Air Supply Unit Bracket Bolt
Air Supply Unit Upper to Lower Part Bolt
Body Acceleration Sensor Bolt
Compressor Unit and Solenoid Valve Block Bracket
Bolt
Bolt
Nut
Connector Piece in Solenoid Valve Block
Connector Piece in Residual Pressure Retaining Valve
Connector Piece in Pressure Reservoir
Connector Piece in Line Connector (Pressure Reservoir T-Piece)
Solenoid Valve Block Bracket Bolt
Solenoid Valve Block to Bracket Bolt
• 1
For bolt tightening clarification, refer to
⇒ "4.4 Air Supply Unit and Solenoid Valve Block Overview", page 225
-19, 20, 21, 22 and 24-
208
Rep. Gr.43 - Self-Leveling Suspension
Component
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Fastener Size
1
and see items
Nm
- 20
- 5
- 8
- 9
- 20
- 9
- 3
- 5
- 5
- 3
- 9
- 4