Siemens S7-400 Equipment Manual page 100

Approvals
RoHS
The CP meets the requirements of the following directives:
• EU directive 2011/65/EU on the restriction of the use of certain hazardous substances in
electrical and electronic equipment.
• SI 2012/3032 The Restriction of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulations 2012
Applied standard: EN IEC 63000
c(UL)us
Applied standards:
• Underwriters Laboratories, Inc.: UL 508 Listed (Industrial Control Equipment)
• Canadian Standards Association: CSA C22.2 No. 142 (Process Control Equipment)
Report / UL file: E85972 (NRAG, NRAG7)
cULus Hazardous (Classified) Locations
Underwriters Laboratories, Inc.: cULus IND. CONT. EQ. FOR HAZ. LOC.
Applied standards:
• ANSI ISA 12.12.01
• CSA C22.2 No. 213-M1987
APPROVED for Use in:
• Cl. 1, Div. 2, GP. A, B, C, D T4
• Cl. 1, Zone 2, GP. IIC T4
Ta: Refer to the temperature class on the type plate of the CP.
Report / UL file: E223122 (NRAG, NRAG7)
Note the conditions for the safe deployment of the CP according to the section Notes on use
in hazardous areas according to UL HazLoc / FM (Page 42).
FM
Factory Mutual Approval Standard Class Number 3600, 3611, 3810
Class I, Division 2, Group A, B, C, D, T4 or Class I, Zone 2, Group IIC, T4
Ta: Refer to the temperature class on the type plate of the CP.
Certificate of Compliance: 3030463
Australia - RCM
The CP meets the requirements of the AS/NZS 2064 standards (Class A).
100
Equipment Manual, 03/2023, C79000-G8976-C256-07
CP 443-1 Advanced