Figure 16 Transportation Of Compressor With Hanger - Hertz HDD Series Instruction Manual

TRANSPORTATION, HANDLING, INSTALLATION

Figure 16 Transportation of Compressor with Hanger

➢ While the compressor is carried by forklift, pay attention to carry it not higher than necessary for slow
and easy handle(Figure 13).
➢ Before lifting a compressor on pallets by a forklift, be sure that the compressor has been strongly
and safely mounted on the pallets. Otherwise, the compressor might fall down from
the pallets, resulting in damages and injuries(Figure 14)
➢ If there is no forklift or the available forklift does not properly work in the installation site, use a crane
and hanger as shown on the Figure 15-16 to lift the compressor.
➢
Recheck any screws and bolts that might have loosen and lost in transit.
➢ Be sure that all the ropes, hooks and similar equipment to be used for lifting and supporting
are of such quality and strength as to safely carry the compressor. If you do not know the exact
weight the compressor before transportation and handling, do not attempt carrying it before learning
its actual weight.
➢ Act slowly and carefully when carrying the compressor. Any crash and falling may result in such
damages as may jeopardize proper operation of the internal parts and components of the
compressor.
➢ Be sure that there is no person standing under the compressor when lifting up and down.
➢ The compressor should be placed on a surface of adequate capacity to carry the compressor
weight.
33