Moving Parts; Combustible And Sharp Surfaces - Hertz HDD Series Instruction Manual

SAFETY
➢ Do not place combustible materials such as a piece of cloth, sawdust, paper-like solids around your
compressor.
➢ Do not operate compressor without creating adequate ventilation condition.
➢ Do not operate your compressor on over-capacity unless modified.
2.5

Moving Parts

➢ Do not operate the compressor when the coupling and fan casings are removed.
➢ Keep your hands, arms and clothes away from rotating parts as much as possible. When there is a
situation that requires you to approach rotating parts, be sure that you are not wearing baggy
clothes.
➢ Make sure that the main power cord is disconnected in advance so that your compressor is not
started during repair and maintenance unintentionally.
➢ The running compressor can be turned off quickly with the effect of the intake fan. In such a case,
make sure that do not let your hands and fingers from pinching.
➢ When running your compressor, keep all the living things away from the compressor to protect them
against damage that may be caused by jetting and exploding.
➢ If you will use your compressor with remote control make sure that the necessary warning indicators
show this status. In this way, a user near your compressor will be aware of the situation and
understand that he/she should stand at a necessary safety distance.
➢ In order to prevent accidents that may occur due to lubricants such as oil, water etc. always keep the
area around your compressor, the cantilever floors such as stairs clean.
➢ While controlling inside of the machine, ensure adequate lighting for the rotating parts to be seen.
2.6

Combustible and Sharp Surfaces

➢ Some parts in your compressor (screw unit, radiator, separator tank, oil filter, etc.) can reach high
temperatures during operation and can cause burns if contacted. Do not touch these surfaces.
➢ Do not ignore that the oil used in the system while the compressor is running may reach high
temperatures.
➢ In the event of oil leakage from your compressor, disconnect the main power by shutting down via
the emergency switch without manual intervention.
➢ Never contact or make any move towards your compressor during operation. Do not use objects
such as rod, cable, stick etc. for this purpose.
➢ Stay away from all air outlets of your compressor (safety and relief valves, nozzles, etc.). Do not
forget that the air discharged from the air outlets is hot and may cause injury.
5