Recommendations - Hertz HDD Series Instruction Manual

SAFETY
Read the safety and protection precautions before starting the compressor.
➢ Keep clean any warning signs, and make sure that they are readily visible on the compressor.
➢ Clean the warning signs with soap and water and dry with a soft cloth.
➢ Replace any damaged warning signs. Complete any missing warning signs.
➢ After removal of any part or component with warning sign thereon, make sure that the
warning sign is replaced after replacement of the same part or component.
Place the new warning signs on clean and dry surfaces. Make sure that no air bubbles are
left between the sign and the surface.

2.13 Recommendations

➢ Make sure that the shields are installed after any repair, maintenance and adjustment done on your
compressor.
➢ After any repair, maintenance and adjustment on the compressor be sure that there would be
left no part, component, cleaning materials and hand tools around the compressor.
➢ Be sure that the moving parts are not in touch of the other parts.
➢ Be sure that all the electrical wires are properly connected to the right points on the compressor.
➢ When the compressor would not be used for a long time, store it in a dry and warm place.
Safety Sign Description
Wear earpieces!
Rotational direction of Coupling!
Please
instructions!
9
read the operating