Safety; Operating Conditions; Unauthorized Modifications/Changes - Hertz HDD Series Instruction Manual

SAFETY

2 SAFETY
2.1

Operating Conditions

➢ Make sure that use and maintenance of your compressor are made by an authorized person.
➢ Do not use your compressor until these operating instructions have been understood.
➢ Do not neglect the maintenance of your compressor.
➢ Only air and inert gases can be used with this compressor (for more detail, please contact your
authorized service representative).
➢ Use your compressor in environments with a temperature range of 35
0 C). (In the case of different temperatures, please contact your authorized service representative.)
➢ For other operating conditions not specified in the operating instructions please note that the written
consent of HERTZ COMPRESSOR is required.
➢ When you allow other people to use your compressor make sure the individuals have read these
instructions.
➢ In case of failure to comply with the conditions described in the operating instructions, remember
that there may be large-scale accidents where your compressor becomes unusable and fatal
injuries.
➢ If you think that there is a security breach or fault related to the compressor;
•
Do not start your compressor.
•
Report to the authorized person as soon as possible.
•
Hang a warning sign related to the case to a portion of the compressor that can be seen.
•
Make sure that the power cables are not connected so that your compressor is not used by
third parties.
2.2

Unauthorized Modifications/Changes

➢ Do not make any modification/change on your compressor without consent of HERTZ
KOMPRESSOREN.
➢ Unauthorized changes may cause malfunction and a reduction in the life of your compressor as well
as serious injury.
Remember that your compressor may be out of warranty as a result of changes
made without the consent of HERTZ COMPRESSOREN.
3
0 0 0
F (+2 C) and 110 F (+43