Panasonic WJ-SX550C Operating Instructions Manual page 111

b) Selecting Area before Zooming Procedures:
1. Select the desired monitor and camera.
Refer to the Monitor Selection and Camera Selection.
2. Select the Ele Zoom (C3) Menu on the LCD display by
pressing the appropriate Direction buttons.
3. Press the Function (F2) button to select the Zooming
Position Mode.
C3
Ele Zoom Off
Ele Zoom Posi
4. Press the Function (F3 or F4) button repeatedly to
select the desired zooming area.
The emphasized area is switched over on the monitor
as shown in the previous table.
5. Press the Function (F1) button to select the Electronic
Zoom Mode.
A zoomed picture of the area selected in step 4 above
appears on the monitor.
Ele Zoom Posi
5
Ele Zoom On
6. Press the Function (F1) button to turn the Electronic
Zoom Mode off.
Ele Zoom On
Ele zoom OFF
116
On Posi
F1 F2 F3 F4
On Off < >
F1 F2 F3 F4
On Off < >
F1 F2 F3 F4
Off Posi < >
F1 F2 F3 F4
Off Posi < >
F1 F2 F3 F4
ON Posi
F1 F2 F3 F4
Backlight Compensation (BLC) Mode
The following function requires the use of cameras
equipped with the specific feature.
1. Select the desired Monitor and camera.
Refer to the Monitor Selection and Camera Selection.
2. Select the BLC (D2) Menu on the LCD display by
pressing the appropriate Direction button.
D2
BLC Off
Auto Preset
F1 F2
3. Press the Function (F1) button to toggle the Auto BLC
Mode on and off.
BLC Off
Auto Preset
F1 F2
BLC Auto
Off Preset
F1 F2
4. Press the Function (F2) button to toggle the Preset BLC
Mode on and off.
BLC Off
Auto Preset
F1 F2
BLC Preset
Auto Off
F1 F2
F3 F4
F3 F4
F3 F4
F3 F4
F3 F4