Table of Contents
Advertisement
Displaying Playback Video
If the VCR's Video Output is connected to the Monitor Input
(MONITOR IN) Connector on the WV-PB5504A Video
Output Board, the VCR's video can be displayed on the
monitor by the following procedures.
When this function is selected, the Camera Title, Date, and
Time are not displayed on the active monitor.
1. Select the monitor connected to the Monitor Output
(MONITOR OUT) Connector systemized with the con-
nected VCR's Monitor Input (MONITOR IN) Connector.
Refer to the Monitor Selection.
2. Press the ALT button (indicator is on), then press the
MON (ESC) key.
The picture on the active monitor will be replaced by
the video output connected to the Video Output Board.
The display "in" appears on the LCD display as shown
below.
ALT
A1
Camera
Monitor 01 [in]
5
3. Press the ALT button again (indicator is off) to return to
the original picture.
112
1
2
3
4
5
6
7
8
9
0
MON
CAM
ESC
SET
01
SLW
FST
Title Display
1. Select the desired monitor and camera.
Refer to the Monitor Selection and Camera Selection.
2. Select the Display (A3) Menu on the LCD display by
pressing the Direction buttons.
A3
Display
All Mon Time Title
F1
F2
MAY 07'00 14:23:56
C 01 M16 3rd Floor
Pr64 Sp
Room
3. Press the Function (F1) button to toggle all items dis-
played on the active monitor on and off.
F1
MAY 07'00 14:23:56
C 01 M16 3rd Floor
Pr64 Sp
Room
4. Press the Function (F2) button to toggle the monitor
status display on the active monitor on and off.
MAY 07'00 14:23:56
C 01 M16 3rd Floor
Pr64 Sp
F3 F4
306
306
F2
Room
306
Hide quick links:
Advertisement
Table of Contents
