Panasonic WJ-SX550C Operating Instructions Manual page 104

Tour Sequence
The following functions are available only if a Tour
Sequence has been previously established through the Set
Up Menu.
As described on page 70, any one of 32 tours can be
assigned to any one of 16 monitors.
1. Select the desired monitor.
Refer to the Monitor Selection.
2. Select the desired Tour Sequence number by pressing
the Numeric keys.
A1
3. Press the FORWARD SEQ button to run the Tour
Sequence in forward direction on the active monitor.
5
T-Seq
Monitor 16
4. Press the STOP button to pause a Tour Sequence that
is being run on the active monitor.
T-Seq
Monitor 16
109
Camera 01
Monitor 16 SLW FST
1 2 3
4 5 6
7 8 9
0
MON CAM
ESC SET
Camera 01 1
Monitor 16 SLW FST
FORWARD
SEQ
01
STOP
01 Stop
5. Press the FORWARD SEQ button to restart a Tour
Sequence forward from the step that was previously
paused by pressing the STOP button.
FORWARD
SEQ
T-Seq 01
Monitor 16
6. Press the BACK SEQ button to restart a Tour
Sequence backward from the step that was previously
paused by pressing the STOP button.
BACK
SEQ
T-Seq 01
Monitor 16
7. Press the INC +1CAM button to move the sequence
one frame to the next step (in forward or reverse run
direction) from the step that was previously paused by
pressing the STOP button.
INC
+1CAM
T-Seq 01 Stop
Monitor 16
8. Press the DEC –1CAM button to move the sequence
one frame to the previous step (in forward or reverse
run direction) from the step that was previously paused
by pressing the STOP button.
DEC
-1CAM
T-Seq 01 Stop
Monitor 16