Percussion Play Akadinda Installation Instructions

Installation Instructions
Surface Fixed
Freechimes
Pentatonic
Symphony
Page 1 of 3
Components:
M6 Saddle Straps
X3
M6x20mm
Secure Screw
X6
M8x40mm
Metric Conversion:
Secure Screw
500mm/ 24"
X10
700mm/ 33"
1.5m/ 59"
M8 Lock Washer
X10
Weight of heaviest part
BS EN 1176
2. Attach Surface Fixing posts
to legs (See Surface Fix Post
Installation Sheet).
3. Locate Instrument in
desired location and mark
holes to fix to desired surface.
4. Fix Surface Plate to level
surface using Coachscrews,
Rawlbolts, chemical anchors
or similar as deemed
appropriate by Installer.
5. Make sure all fixings are
covered and secure using
cover caps provided.
6. Beaters can be fixed to
Steel posts with fixings
provided.
12kg (Freechimes Left Panel)
Pair Large Red Pair Small
Beaters X2 Beaters X1
1. Carefully lay 3 x legs on a
level surface and check
distance between each leg is
equal. Join together the 2
parts of the symphony. Line
up pre drilled holes in the
backboards with the legs and
ensure the instrument is
aligned square with the legs.
Fix in place using M8x40mm
screws supplied (see
installation guide).
x24
x3
2 Part Cover Cap
M10 Barrel Nut
1.5m
Ground Surface
Spares available from
x3
percussionplay.com
M10x70 Security Screw
1.5m
Install Instrument
with 1.5m free space
(from widest point)
around it.
1260mm
25 Kg
or from your
local distributor