High-pressure spray is able to inject toxins into the
body and cause serious bodily injury. Do not stop
leaks with hand or rag.
8. Inspect for leaks. If leaks occur, perform Pressure
Relief Procedure, page 9. Tighten fittings. Perform
Startup, steps 1 - 6. If no leaks, proceed to step 9.
9. Submerge suction tube in paint pail.
PAINT
333402A
ti2714a
10. Trigger gun into waste pail until paint comes out of
gun. Release trigger, pump will build up pressure and
motor will stop. Move gun to paint pail and trigger for
20 seconds.
WASTE
11. Engage trigger lock.
Operation
ti2713a
13