Sanyo KMS0912 Instruction Manual page 6

MODE selector switch
Timer selector switch
Fan speed selector switch
SENSOR
Transmitter
Display
ON/OFF operation button
Cover
Temperature setting
button
NOTE:
Timer setting buttons
PROGRAM button
NIGHT SETBACK button
6
Remote Control Unit
Transmitter
00M
coot ER
FAN COOL
TIMER
MODE
NORM. PROGRAM
CLOCK
OFF ON
PROGRAM
TIMER
* NIGHT SETBACK
LOW HIGH
MED. AUTO
FAN SPEED
SANYO
SENSOR
When you press the buttons or move the switches on the remote control
unit, the lamp at the tip of the unit flashes to transmit the setting
changes to the receiver in the air conditioner.
Information is displayed while the remote control unit is switched on.
The display shows the time and the room temperature at the remote
control unit when the unit is switched off.
This button is for turning the air conditioner on and off.
The cover opens from the left. Just pull it open.
Press "COOLER" button to change the set temperature down.
Press "WARMER" button to change the set temperature up.
You can press the temperature setting buttons keeping the cover closed.
First, press the PROGRAM button to select the mode you want.
Each time you press "HH" button, the hours advance by one.
Each time you press ' 'MM" button, the minutes advance by one.
For details, see "Setting the Timer".
Press this button to select the mode you want to program.
For details, see "Night Setback Mode". When you press this button in
the COOL mode, the
and the remote control unit will automatically adjust the set temperature
to save energy.
Display
ON/OFF operation button
Temperature setting buttons
Timer setting buttons
PROGRAM button
NIGHT SETBACK button
Cover
mark appears at the lower left of the display,
01-352R)6