Table of Contents
Advertisement
Establish power supply
If you have VisionSensor PV2 or a VisionSensor PV3 an 0.5 meter cable with an M12 8-pin
connector is used for power supply and I/O.
Power and I/O cable
Connect the power and I/O cable to the M12 8-pin connector of the camera. Then connect the
green terminal connector of I/O cable to the green terminal connector of the power supply. Now
you can power on the camera and continue with the next step "First login via SSH".
Strassheimer Str. 45; 61169 Friedberg; Germany; Tel. +49(0)6031-6842611
IMAGO Technologies GmbH
info@imago-technologies.com; www.imago-technologies.com
Pin assignment M12 connector camera
Pin
Function
1
Power (21V-28V)
2
GND
3
Digital IN0
4
Digital IN1
5
Digital OUT3
6
Digital OUT0
7
Digital OUT1
8
Digital OUT2
Page 8 / 16
Advertisement
Table of Contents
