What You Need - IMAGO VisionSensor PV2 Getting Started

Welcome
Congrats on your new VisionSensor PV2 / PV3! In this "Getting Started" guide, we will show you
all necessary steps to get the VisionSensor PV2 / PV3 ready for first operation.

What you need

•
A PC with the following requirements:
o OS: Windows 10 or Debian GNU/Linux
o Internet connection for downloading the required tools
o Ethernet port
•
Requirements for the VisionSensor PV2 / PV3:
o 8-pin power and I/O cable with green terminal connector (included in the Vision-
Sensor PV2 / PV3 starter kit)
Strassheimer Str. 45; 61169 Friedberg; Germany; Tel. +49(0)6031-6842611
VisionSensor PV2 / PV3
IMAGO Technologies GmbH
info@imago-technologies.com; www.imago-technologies.com
Page 2 / 16