Page 14 / 16
As long as
is running, no other application can acquire images from the sensor. Therefore,
you must stop it before starting your own image processing application. To disable the automatic
start after power on or a reboot, open the "Configuration" dialog, switch off the "Start program as
service" option, move the mouse pointer to the button at the right bottom containing the three dots
and select "Save".
Type "/root/ViewIT.sh" in a SSH console to start
again.
. Open the "About" dialog and
For more information see the own documentation of
press the
button.
IMAGO Technologies GmbH
Strassheimer Str. 45; 61169 Friedberg; Germany; Tel. +49(0)6031-6842611
info@imago-technologies.com; www.imago-technologies.com