IMAGO VisionSensor PV2 Getting Started page 4

Attach the Ethernet cable
If you have VisionSensor PV2 or a VisionSensor PV3 you have to attach the Ethernet cable to
the Ethernet connector of the camera. Depending on the version of the camera, the Ethernet con-
nector can look like this:
Strassheimer Str. 45; 61169 Friedberg; Germany; Tel. +49(0)6031-6842611
4-pin Ethernet connector of
VisionSensor PV2
8-pin Ethernet connector of
VisionSensor PV3
IMAGO Technologies GmbH
info@imago-technologies.com; www.imago-technologies.com
Page 4 / 16