Page 6 / 16
Select "Internet Protocol Version 4". Then click on "Properties". Make sure that both options "Ob-
tain an IP address automatically" and "Obtain DNS server address automatically" are enabled.
If you are using Debian GNU-/Linux on your PC, you can use for example nmtui to configure the
Ethernet adapter. Start nmtui and select the Ethernet adapter which is connected to the camera.
Then select "Link-Local" as IPv4 address method:
IMAGO Technologies GmbH
Strassheimer Str. 45; 61169 Friedberg; Germany; Tel. +49(0)6031-6842611
info@imago-technologies.com; www.imago-technologies.com