DeWalt DW297 Instruction Manual page 3

DW297/607309 9/24/01 9:03 AM
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS
OR ANY D WALT TOOL, CALL US TOLL FREE AT:
E
1-800-4-D WALT (1-800-433-9258)
E
ANVIL
SWITCH
Specifications
Model DW297
Motor Single Phase
Power Source 120 V AC 60 Hz
Current 10 A
No-Load Speed 1600 rpm
Capacities 5/8"-7/8" (M16-M22)
Torque Appox. 434 ft-lbs. (60 kg-m)
Drive 3/4" (19 mm)
Weight 11.9 lbs.
Page 4
BRUSH
CAP
SIDE
HANDLE
Important Safety Instructions For All Tools
WARNING: Death or serious bodily injury could result from
improper or unsafe use of power tools. Tho avoid these risks, follow
these basic safety instructions:
READ ALL INSTRUCTIONS
• NEVER TOUCH MOVING PA RTS. Never place your hands,
fingers or other body parts near the tool's moving parts.
• NEVER OPERATE WITHOUT ALL GUARDS IN PLACE. N e v e r
operate this tool without all guards or safety features in place and
in proper working order. If maintenance or servicing requires the
removal of a guard or safety feature, be sure to replace the guard
or safety feature before resuming operation of the tool.
• A LWAYS WEAR EYE AND EAR PROTECTO R . Protect yourself
from flying or expelled wood chips, metal particles or other debris
by using protective goggles or equivalent eye protector. Wear ear
protector to protect yourself from excessive noise.
• PROTECT YOURSELF AGAINST ELECTRIC SHOCK. P r e v e n t
body contact with grounded surfaces such as pipes, radiators,
ranges and refrigeration enclosures. Never operate the tool in
damp or wet locations.
• DISCONNECT TOOLS. Never leave the tool connected to a power
source. Always disconnect the tool from its power source before
servicing, inspection, maintaining, cleaning and before changing or
checking other parts.
• AVOID UNINTENTIONAL STA RT I N G . Don't carry the tool while it
is connected to its power source. Don't carry the tool with your
finger near the power switch. Be sure the power switch is in the
"off" position before connecting the tool to its power source.
• S TORE TOOL PROPERLY. When not in use, the tool should be
stored in a dry place. Keep out of reach of children. Lock-out the
storage area.
• KEEP WORK AREA CLEAN . Cluttered areas and benches invite
injuries. Clear all work areas and work benches of unnecessary
tool, debris, furniture, etc.