Table of Contents
Advertisement
General information
1.5.3
Radiation safety information
WARNING
1.5.4
Mechanical safety information
CAUTION
CAUTION
Siemens AG
Medical Solutions
X-ray radiation!
Non-compliance can lead to illness, irreversible damage to body
cells and the genotype, severe injury and even death.
When performing work on the system during which radiation must
be released, the radiation protection directives and the rules for ra-
diation protection according to ARTD 02.731.02 must be complied
with.
Please note:
Use available radiation protection devices.
Wear radiation protection clothing (lead apron).
Stay as far away as possible from the radiation source.
Release radiation only if necessary.
Set the radiation activity as low as possible. (low kV and
mA values, short radiation time)
Release radiation for as short a time as possible.
Checks in which radiation must be released are identified
by the radiation warning symbol.
Risk of burns from hot parts or components! Non-compliance can
result in minor to more severe burns, especially on the hands.
Parts and components (e.g., power components, cooling element,
electromagnetic brakes) that can exceed 50 degrees Celsius dur-
ing operation are accessible after the covers are opened.
To avoid burns, switch the system off prior to touching
parts or components and allow at least 5 minutes of cool-
ing.
Risk of injury from mechanical parts! Non-compliance can result
in minor to more severe injury, especially to the hands.
Parts such as flat plugs, threaded bolts, cut-off cable ties and com-
ponent edges that, if care is not taken, can cause crushing, abra-
sion and cuts to the skin, particularly to the hands, can be touched
after the covers are opened.
Perform the required work with special care and atten-
tion to detail.
If needed, wear work gloves.
SPR2-230.101.01.02.02
08.05
Monitor 44cm, 100/120HZ
Page 9 of 26
CS PS 24
9
Advertisement
Table of Contents
