Related Manuals for Hendi HND299289
Summary of Contents for Hendi HND299289
- Page 1 HIGH POWER BLENDER HND299289 You should read this user manual carefully before using the appliance.
- Page 2 Keep these instructions with the appliance. For indoor use only.
-
Page 3: Safety Regulations
Dear Customer, Thank you for purchasing this Hendi appliance. Before using the appliance for the first time, please read this manual carefully, paying particular attention to the safety regulations outlined below. Safety regulations • This appliance is intended for buffet and household use. -
Page 4: Special Safety Regulations
• Always turn the appliance off before disconnecting the plug. • Never use accessories other than those recommended by the manufacturer. Failure to do so could pose a safety risk to the user and could damage the appliance. Only use original parts and accessories. •... - Page 5 • Do not clean or store the machine unless it is completely cooled down. • Do not move the machine while it is under operation. Unplug the machine when moving the machine and hold it at the bottom. • Do not operate the machine without ingredients to avoid overheated. •...
-
Page 6: Operation
Appliance and parts 1) transparant cap 2) lid 3) pusher 4) jar handle 5) jar 6) cutting unit 7) control panel 8) motor unit NOTE: Grey marked parts are food contact ap- proved. Operation • Always stand in front of the appliance in such •... -
Page 7: Troubleshooting
Cleaning and maintenance of the motot unit • Always remove the plug from mains before • Never use aggressive cleaning agents and/or cleaning the appliance. abrasives. Do not use any sharp and/or pointed • Beware: Never immerse the appliance in water objects. - Page 8 Sensitive switch Pulse switch AC 220-240V Motor Earth Technical specification Item no.: HND299289 Rotation speed without loading (rpm): Operating voltage and frequency: 240V~ 50/60Hz - Minimum: 16,000 +/- 10% Peak power ≈ 1680 W - Maximum : 24,800 +/- 10% Dimensions: 270x250x(H)550 mm Noise level: >85dB...
- Page 9 Exploded drawing and part list...
- Page 10 Part no. Part name Quantity Remark Small Lid Cover set Contains also part no. 1 Pusher 2.5L jar set Contains also part no. 1,2,4,5,6,7 Knife set Seal Ring Fixed Plate M4*6 Screw Rotor Contains also part no. 8 Base of 2.5L Jar Body Pulse Switch On/Off Switch...
- Page 11 Important notice to UK users This appliance is fitted with a UK approved mains placing, ensure that the fuse is removed before- plug and a 13A fuse. Should the fuse need to be hand. Always dispose of defunct plugs and fuses replaced, an ASTA or BSI approved BS1362 fuse, immediately.
- Page 12 Importer: Neville UK PLC Find Hendi on internet: Unit 6, Viking Way. Erith, Kent. www.hendi.eu DA8 1EW, England www.facebook.com/HendiToolsforChefs https://www.nevilleuk.com/ www.linkedin.com/company/hendi-food-service-equipment-b.v. www.youtube.com/HendiEquipment - Changes, printing and typesetting errors reserved. © 2022 Hendi B.V. De Klomp - The Netherlands Ver: 15-02-2022...