Related Manuals for Hendi HND298060
Summary of Contents for Hendi HND298060
- Page 1 BLENDER WITH NOISE COVER HND298060 You should read this user manual carefully before using the appliance.
- Page 2 Keep these instructions with the appliance. For indoor use only.
-
Page 3: Safety Regulations
Dear Customer, Thank you for purchasing this Hendi appliance. Before using the appliance for the first time, please read this manual carefully, paying particular attention to the safety regulations outlined below. Safety regulations • This appliance is intended for commercial use. -
Page 4: Special Safety Regulations
• Always turn the appliance off before disconnecting the plug. • Never use accessories other than those recommended by the manufacturer. Failure to do so could pose a safety risk to the user and could damage the appliance. Only use original parts and accessories. •... - Page 5 • Do not clean or store the machine unless it is completely cooled down. • Do not move the machine while it is under operation. Unplug the machine when moving the machine and hold it at the bottom. • Do not operate the machine without ingredients to avoid overheated. •...
-
Page 6: Installation
Special safety features IMPORTANT: This machine has a specially de- The machine can only operate when the protec- signed safety feature: Protective cover (10). tive cover (10) is closed and the jug (7) is installed properly on the motor unit (5). Preparations before installation •... - Page 7 Remarks: 4. Do not fill liquids above the MAX. mark of the 1. For the best results when blending solid food- stuffs, only add small portions in succession, jug (7). not all ingredients at the same time. 5. Liquids to be blend should be at or below 2.
-
Page 8: Troubleshooting
- Leaving the machine for cooling down for about 30 minutes and then start again. In case of any doubt, always contact your supplier! Technical specification Item no.: HND298060 Net weight: approx. 9,7 kg Operating voltage and frequency: 240V~ 50/60Hz Noise level: ≤ 85dB(A) - Page 9 Machine exploded drawing...
- Page 10 Machine part list Part no. Part name Quantity Part no. Part name Quantity Cap cover Motor inner housing Jug lid Bottom housing Stamper (not supplied) Bottom plate Protective cover (rear) Fixing screw Jug set Protective cover (front) Protective cover rubber Protective cover (inner) sealing (rear) Blade assembly...
- Page 11 Circuit diagram Power Variable switch resistor Micro switch 10A/250V Magnetic safety Main micro switch 220-240V Pulse button Important notice to UK users This appliance is fitted with a UK approved mains placing, ensure that the fuse is removed before- plug and a 13A fuse. Should the fuse need to be hand.
- Page 12 Importer: Neville UK PLC Find Hendi on internet: Unit 6, Viking Way. Erith, Kent. www.hendi.eu DA8 1EW, England www.facebook.com/HendiToolsforChefs https://www.nevilleuk.com/ www.linkedin.com/company/hendi-food-service-equipment-b.v. www.youtube.com/HendiEquipment - Changes, printing and typesetting errors reserved. © 2022 Hendi B.V. De Klomp - The Netherlands Ver: 15-02-2022...