Riso VALEZUS T1200 Troubleshooting Manual page 36

The [Ink Information Input] screen is displayed.
Follow the on-screen instructions to enter the set values.
To ensure optimal printing quality, the machine obtains information from ink cartridges. If the information
cannot be obtained properly, enter the appropriate values on the [Ink Information Input] screen.
^ ^
• If you replace the ink cartridges or you press the [Power] key on the operation panel to restart the machine, the
set values entered on the [Ink Information Input] screen disappear.
Reconfigure the ink cartridge information.
If the [Ink Information Input] screen is displayed, it means that a non-RISO ink cartridge has been installed.
To continue using the non-RISO ink cartridge, enter the appropriate values referring to the following table.
Message
Select a temperature
adjustment setting for
the set ink.
Select a cleaning
operation for the set
ink.
Set the recommended
Use By date of the ink
cartridge.
34
Setting/Description
To make the optimal printing available, set the
monitor range of the printable temperature for
the ink.
Set the utmost cleaning cycle for the ink which
will not cause the defective printing.
^ ^
• If the set value exceeds the maximum
number of sheets, the cleaning cycle
setting confirmation screen appears.
Specify the year and month to make the
message appear to indicate that the expiration
date of the ink comes close.
Set value/Details
[1] (30 °C - 40 °C)
[2] (30 °C - 45 °C)
[3] (25 °C - 45 °C)
[4] (20 °C - 45 °C)
[5] (20 °C - 40 °C)
[1] (500 to 700 sheets)
[2] (500 to 1,500 sheets)
[3] (500 to 3,000 sheets)
[4] (500 to 5,000 sheets)
[5] (500 to 5,000 sheets)
The default values are different
between [4] and [5] while their
selectable ranges are the same.
[4]: 2,000 sheets
[5]: 3,000 sheets
[Month]: 1 - 12
[Year] (last two digits): 00 - 99
VALEZUS T1200 Troubleshooting Guide