VisionTek VT4950 User Manual page 9

DOCKING STATION SETUP (Continued)
Connecting Systems
1. Connect the included USB-C cable to the USB-C Host A port on the back of the VT4950. Connect the other
end to your host laptop, PC or Mac.
2. Connect the included USB-C cable to the USB-C Host B port on the back of the VT4950. Connect the other
end to your host laptop, PC or Mac.
3. The VT4950 has high resolution DP and HDMI outputs. Resolutions up to 3840 x 2160 @ 60Hz are
supported depending on monitors connected and the host system capabilities.
USB-C USB-C
Host A Host B
8