Robern UPLIFT TECH CABINET Instructions Manual page 2

TOOLS NEEDED
NOTES
Unpack the mirror. Check the box thoroughly for all hardware and loose parts. Carefully inspect the mirror for damage. All wiring should
be done by a qualified licensed electrician.
WARNING:
CAUTION:
CAUTION:
grounding conductor must be run with the circuit conductors and connected to the equipment grounding terminal or lead on the product.
CAUTION:
all other locations required by the National Electric Code.
CAUTION:
Accessories are available for the Uplift Cabinet. Please consult the accessory instruction guide for installation instructions.
© 2019 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376 www.robern.com
Installation instructions
To reduce the risk of electrical shock, shut off power before wiring the cabinet.
Requires 120 VAC 20 Amp circuit.
This product must be connected to a grounded, metal permanent wiring system or an equipment-
The cabinet must be wired to a 20 Amp GFI (Ground Fault Interrupter) circuit when used in bathrooms and
Maximum shelf load 26.5 LBS
2
Part no. 209-1319-rA rev. 08/21/19
Uplift Tech Cabinet