Specifications - SPL Phonitor 3 DAC Manual

Phonitor 3 DAC – Manual

Specifications

Analog inputs & outputs; XLR (balanced)
Maximaler Ein- und Ausgangspegel
Input impedance (XLR)
Output impedance (XLR)
Common mode rejection (1 kHz)
Frequency range
THD + N (0 dBu, 1 kHz)
Noise (A-weighted)
Crosstalk (1 kHz)
Dynamic range
Digital inputs: DAC768 (optional)
AES/EBU (XLR), PCM sample rate:
Coaxial SPDIF (Cinch), PCM sample rate:
Optic SPDIF (Toslink F06), PCM sample rate:
USB (B), PCM sample rate:
USB (B), DSD over PCM (DoP), sample rate:
0 dBfs calibrated to
Standard Headphones Output, 6.35 mm (1/4") TRS Jack
Wiring
Source impedance
Damping factor (40 Ω)
Frequency range
Crosstalk (1 kHz)
THD + N (1 kHz, 0 dBu)
Noise (A-weighted)
Output power (1 kHz, 1% THD, 250 Ω)
Output power (1 kHz, 1% THD, 32 Ω)
Dynamic range
8
32.5 dBu
22 kΩ
75 kΩ
-82 dB
10 Hz – 100 kHz
0.0009 %
-102 dBu
-95 dB
134.5 dB
44,1/48/88.2/96/176.4/192 kHz
44,1/48/88.2/96/176.4/192 kHz
44,1/48/88.2/96/mit Glasfaser < 1m: 176.4/192 kHz
44,1/48/88.2/96/176.4/192/352.8/384/705.6/768 kHz
2.8 (DSD64), 5.6 (DSD128), 11.2 (DSD256) MHz
15 dBu
Spitze = links, Ring = rechts, Schaft = GND
0.18 Ω
180
10 Hz – 100 kHz
-91 dB
0.0003 %
-102 dBu
2 x 5 W
2 x 1 W
134.5 dB