Panasonic WORKIO DP-CL21 User Manual page 74

Basics
Basics
3
Proceed to the step (A) or (B) depending on your selection at step 2.
(A) Setting the Panasonic DP-CL21P PCL 5c or Panasonic DP-CL21M PCL
5c printer
(1) Click [Advanced...] in the Setup tab and click Output tab.
(2) Click on the Flip on long edge or Flip on short edge check button.
(3) Select Manual in the Duplex Type box.
(4) Click [OK], then click [OK].
(B) Setting the Panasonic DP-CL21M PS printer
Perform B-1 – B-3 depending on your printer's OS.
B-1: Windows 95 / Windows 98 / Windows Me
(1) Click the Duplex box and click Flip on long edge or Flip on short edge in the Paper tab.
(2) Click the Device Options tab.
(3) Select Manual Duplex in the Printer features box.
(4) Select On in the Change setting for box.
(5) Click [OK].
B-2: Windows NT 4.0
(1) Click Long Side or Short Side check button of the Print on Both Sides in the Page Setup
tab.
(2) Click the Advanced tab.
(3) Click Manual Duplex of the Printer Features in the Document Options and select On in
the Change 'Manual Duplex' Setting box.
(4) Click [OK].
B-3: Windows 2000 / Windows XP
(1) Click Flip on Long Edge or Flip on Short Edge check button in the Layout tab.
(2) Click [Advanced...].
The printer's Advanced Options window appears.
(3) Click Manual Duplex of the Printer Features in the Document Options and select On in
the selection box.
(4) Click [OK], then click [OK].
4
Print the document.
Even numbered page(s) are printed and the following message is displayed on the printer
panel.
• If the hard disk drive is installed in the printer, all even numbered pages are printed.
• If the hard disk drive is not installed in the printer, the first even numbered page is printed.
Windows
Insert printed pages
Into MPT Press CONT.
Macintosh
Manual Duplex Printing (Windows Only)
74