Panasonic WORKIO DP-CL21 User Manual page 68

Basics
Basics
6
Repeat steps 3 through 5 for each color (MAGENTA, YELLOW, BLACK).
• To skip a color, press
• To return to a previous color, press
• Before going to step 7, make sure the following is displayed.
7
Press ENTER button to reprint the Color Calibration Test Print Page.
• The line enclosure and Gray Balance reflects the changes made to the settings.
• If you are not satisfied with the current color density settings, repeat the above steps.
NOTE:
• Changes made using Color Calibration are retained until the color density is adjusted next
time.
• The color density setting affects the average life of toner.
Windows
Adjusting the Color Density (Color Calibration)
(CONTINUE) button.
Color Calibration
Calib. Test Prn.
Macintosh
(CANCEL) button.
68