Panasonic WORKIO DP-CL21 User Manual page 157

Basics
2 Orientation
Selects Portrait (vertical) or Landscape (horizontal). A document can be printed upside down by
clicking on the Rotated check box when selecting Landscape. The Rotated function is effective
when setting it from the printer properties window under Windows for Windows 95, Windows 98 or
Windows Me.
.
Portrait
A
3 Duplex
Enables printing on both sides of paper by selecting either Flip on long edge or Flip on short
edge. If the Automatic Duplex Unit is not installed in the printer, set the Manual Duplex to On
page 165). To perform manual duplex printing, refer to
Only)" on page 73
If the Automatic Duplex Unit is installed in the printer, automatic duplex printing can be performed
(see "Performing Automatic Duplex Printing" on page
to Off (see page
To perform the duplex printing, the following media and paper source must be selected.
Media Type
Plain Paper
Thin Paper
Bond / Letterhead
Recycled Paper
Thick Paper / Card
1
* If the Optional Paper Feeder has been installed, the selection is available. If the 2nd Optional
Paper Feeder is installed, Tray 3 is available.
2
* Letter, Legal, A4 or B5 (JIS) must be used for automatic duplex printing.
NOTE:
• If selecting Flip on long edge or Flip on short edge when the Automatic Duplex Unit is not
installed in the printer and Manual Duplex is not set to ON, simplex printing is performed.
Windows
Windows
Landscape Rotated
A
in the "Basics" section
165).
Automatically Select
Multi-Purpose Tray
Tray 1 / Tray 2*
Multi-Purpose Tray
Macintosh
Setting the PS Printer Driver (DP-CL21M only)
A
"Manual Duplex Printing (Windows
183). Be sure the Manual Duplex is set
Paper Source
1 1
/ Tray 3*
Duplex Type
2
Automatic Duplex*
Manual Duplex
2
Automatic Duplex*
Manual Duplex
157
(see