Table of Contents
Advertisement
Identifying Status Indicators
Alert Tones
Your radio uses alert tones to inform you of your radio's condition. The following table lists these tones and
when they occur.
You Hear
Tone Name
Short,
Radio Self Test Fail
Low-Pitched
Reject
Tone
Time-Out Timer Warning
No ACK Received
Play
Individual Call Warning Tone
Long,
Time-Out Timer Timed Out
Low-Pitched
Talk Prohibit/PTT Inhibit
Tone
Lack of Voice PTT Time out
Out of Range
Play
Invalid Mode
A Group of
Busy
Low-Pitched
Tones
Play
Heard
When radio fails its power-up self test.
When unauthorized request is made.
Four seconds before time out.
When radio fails to receive an acknowledgement .
When radio is in an individual call for greater than 6 seconds without any activity.
After time out.
(When PTT button is pressed) transmissions are not allowed.
When the radio ends your call after it detected there are lack of voice for 5 seconds
after the PTT is pressed and hold. Your radio ends the call to enable your radio to
receive calls from other radio users.
(When PTT button is pressed) the radio is out of range of the system.
When radio is on an unprogrammed channel.
When system is busy.
26
CONTENTS
< PREV
NEXT >
Advertisement
Table of Contents
