Table of Contents
Advertisement
Installation and Connection
Installation and Connection
Wiring connection
¥
10 A fuse
Purple with white stripe
Light green
Light blue with yellow stripe
Yellow (Battery wire)
Red (Ignition wire)
Red (A7)
Yellow (A4)
52
ENGLISH
Connect the aerial cord to the aerial terminal
USB terminal (1 m)
(USB1)5V
1.5A
To the car's reverse lamp harness when using the optional rear view camera
REVERSE
PRK SW
To the OE remote adapter (not supplied) which is compatible with your car
(If no connections are made, do not let the cable come out from the tab.)
Connecting the ISO connectors
You may need to modify the wiring of the supplied
wiring harness as illustrated below.
Red
(Ignition wire)
Red (A7)
Unit
Yellow
Yellow (A4)
(Battery wire)
Default wiring
π
Connect a USB device
To the car's parking brake detection switch harness
Extension wire ( ø )
(For best safety, be sure to connect the parking sensor.)
Pin
A4
Yellow
A5
Blue/White
A6
Orange/White
A7
Red
A8
Black
Vehicle
]
B1/B2
Purple
/ Purple/Black
]
B3/B4
Gray
/ Gray/Black
]
B5/B6
White
/ White/Black
]
B7/B8
Green
/ Green/Black
Colour and Function
: Battery
: Power control (12 V
: Dimmer
: Ignition (ACC)
: Ground connection
[
: Right speaker (Rear/Tweeter*)
[
: Right speaker (Front/Mid Range*)
[
: Left speaker (Front/Mid Range*)
[
: Left speaker (Rear/Tweeter*)
* For 3-way speaker system connection, see page 36
350 mA)
Advertisement
Table of Contents
