Table of Contents
Advertisement
In-Car Connections
In-Car Connections
<Device List>
Devices connected for Apple CarPlay, Android
Auto, USB Mirroring, Bluetooth phone, and
Bluetooth audio are listed. You can check their
names and their status on the list (page 9).
<PIN Code>
• To change the PIN code, enter a new PIN code
and touch [Enter] to finish.
• To correct the PIN code input, touch and hold
[Clear], and re-enter a new PIN code.
• This setting is available only when iPhone with
Apple CarPlay is not connected.
<Device Name>
Shows the device name of this unit to be shown on
KW-M785DBW
the Bluetooth device —
<Bluetooth Device Address>
Shows the Bluetooth device address of this unit.
<Initialise>
Initialise the Bluetooth settings (page 44).
<TEL SET-UP>
See step 2 on page 33.
• This setting is available only when iPhone with
Apple CarPlay is not connected.
<Wi-Fi Setup>
Shows the device name, device address and
password of this unit.
<Device Audio Control>
Go to step 2.
<Driving Position>
Sets your driver's seat position of your car — [LEFT]
(initial) or [RIGHT].
This setting changes the sidebar/button position
of Apple CarPlay/Android Auto screens accordingly
with the driver seat position.
• This setting is available only when iPhone with
Apple CarPlay and Android device with Android
Auto are not connected.
<Android Mode Select>
.
Selects Android device usage for Apps — either
[Android Auto] (initial) (page 16) or [Mirroring
for Android] (page 17).
• This setting is available only when AV source is
turned off with no device connected via USB.
<Reset Android Auto Wireless Connection>
Reset Android Auto wireless connection when
you want to change the password for wireless
connection manually. The system of this unit is
rebooted after touching [Yes].
2
Touch [Enter] to display the selected item
screen.
On the <Device Audio Control>
Device Audio Control
Guidance/Voice Recognition Volume
Enter
Phone Incoming Volume
Enter
Phone Calling/Talking Volume
Enter
Speech Quality Adjust
Enter
Media Volume
15
• <Guidance/Voice Recognition Volume> can
be set separately for <Apple CarPlay> and
<Android Auto> within the range of 00 to 40
(Initial: 19).
• <Phone Incoming Volume>, <Phone Calling/
Talking Volume> can be set separately for
<Apple CarPlay> and <Android Auto/
Bluetooth> within the range of 00 to 40 (Initial:
15).
• <Speech Quality Adjust>:
<Microphone Level> can be set within the
range of –10 to +10 (Initial: –4).
<Echo Cancel Level>, <Noise Reduction
Level> can be set within the range of –5 to +5
(Initial: 0).
• <Media Volume> can be set within the range of
00 to 40 (Initial: 15).
screen:
ENGLISH
11
Advertisement
Table of Contents
