Table of Contents
Advertisement
Installation and Connection
Installation and Connection
Notes on using the supplied GPS aerial (')
• Use the supplied GPS aerial ('). Using the GPS aerial
other than the supplied one may cause a drop in
positioning accuracy.
• Depending on the type of car, reception of the GPS
satellite signals might not be possible with an inside
installation.
• Please install the supplied GPS aerial (') in an area
away from any aerials that are used with CB radios or
satellite televisions.
• The supplied GPS aerial (') should be installed at a
position that is spaced at least 30 cm from mobile
phone or other transmitting aerial. Signals from the
GPS satellite may be interfered with by these types of
communication.
• Painting the supplied GPS aerial (') with (metallic)
paint may cause a drop in performance.
Connecting external components
1 GPS aerial input (GPS)
2 Rear view camera input (R-CAM)
3 Video output (V-OUT)
4 Audio video input (AV-IN)
Connect the following type of 4-pole mini plug:
1 Left audio
1
3
2 Right audio
3 Ground
24
4 Composite video
5 Steering wheel remote input (REMO-IN)
• Connect to the car's steering remote harness
using the steering wheel remote input cable.
Contact your JVC dealer for details.
6 Microphone input (MIC) (page 52)
7 DAB aerial input
• Connect a DAB aerial (separately purchased):
8 Aerial terminal
9 USB terminal
p Output terminals*
• Left output (White)
• Right output (Red)
REAR: Rear speaker preouts
FRONT: Front speaker preouts
SW: Subwoofer preouts
For 3-way crossover:
REAR: Tweeter preouts
FRONT: Mid range speaker preouts
(USB1)5V
1.5A
SW: Subwoofer preouts
* When connecting an external amplifier, connect its ground wire
to the chassis of the car; otherwise the unit may be damaged.
ENGLISH
51
Advertisement
Table of Contents
