System Settings - JVC KW-M785DBW Instruction Manual

Settings Settings
Select the mark (1), and then adjust the position of
the selected mark (2).
Initialise
Make sure that A and B are horizontally parallel, and
that C and D are the same length.
• Touch and hold [Initialise ] for 2 seconds to set all
the marks to the initial default position.
<Reverse with ATT>
• ON (Initial): The sound is attenuated while the gear is
shifted to the reverse (R) position.
• OFF: Not used.
<AV Input>
Select the usage of the AV-IN input terminal
(adjustable only when the AV source is turned off).
• AV-IN (Initial): Select this when an external AV device
is connected.
To watch the connected device, select [AV-IN] on
the source/option selection screen.
• Camera: Select this to watch the view from the
connected camera.
To watch the camera view, select [Camera] on the
source/option selection screen.

System settings

1
Display the <System> screen.
From the Home screen (page 3), touch as
follows:
Then, on the <Settings> screen, touch as follows:
[System] (1) → [Enter] for the item you adjust or
the appropriate setting for the item (2).
Settings
Language
Audio English (UK)
Clock
Display Enter
Time Format
Input Enter
Time Zone
System Enter
Clock Adjust
Key Enter
2
Adjust the item if more steps are required.
See the respective explanation that follows.
<Language>
Select the text language used for on-screen
information. For details, see page 4.
"Please switch ignition off" appears when the setting
is changed. Turn the ignition switch off then on to
enable the change.
<Clock>
Set the date and clock adjustment method. For details,
see page 5.
<Time Format>
Select the time display format—either [12-Hour] or
[24-Hour] (Initial).
<Time Zone>
Select the time zone for your residential area. For
details, see page 5.
<Clock Adjust>
Adjust the date and clock manually. For details, see
page 5.
<Daylight Saving Time>
(Not used when the clock is set manually)
Activate this by selecting the additional time for
Daylight Saving Time (if available in your residential
area). For details, see page 5.
<Connections SETUP>
Specify or confirm the connected devices information.
<Device List>
Shows the list of the connected (registered) devices.
For details, see page 9.
<PIN Code>
Shows the current PIN code for this unit.
• This setting is available only when iPhone with Apple
CarPlay is not connected.
ENGLISH 43