Connection; Connecting With A Pc; Connecting The Power Cord - JVC HMD-VS1DW Instructions Manual

Connection

The connection procedures differ according to the device used. For details, please refer to the instruction manual of
0
the device to be connected.
Some cables cannot be connected to this unit due to the size of their connector cover.
0

Connecting with a PC

Connect the two DisplayPort cables connected to this unit to the DisplayPort terminals of the PC.
0
Connect the USB cable connected to this unit to the USB terminal of the PC.
0
*1 For more details on the recommended operating system requirements on the PC, please refer to "Specifications" (P. 38).
*2 When switching the system, do not connect a SteamVR Tracking System 2.0 equipment other than this unit to the USB
terminal.
Doing so may damage the data on the equipment. (Refer to "Software" P. 22)

Connecting the Power Cord

A Connect the DC cable of the supplied AC adapter and the DC cable connected to this unit
B Connect the power cord to the AC adapter (use a power cord according to the environment in which the unit is used)
C Insert the power plug into the wall outlet.
Precautions to prevent fire and electric shock
When you are not using the HMD, please unplug the power cord from the outlet.
0
Connect it using only the power cord supplied.
0
Do not use a voltage other than the indicated power voltage.
0
Do not damage, break or modify the power cord. Do not place a heavy object on the power cord, or heat or pull it.
0
Doing so may damage the power cord.
Do not unplug the power cord with wet hands.
0
DisplayPort Cable (2 pcs)
USB cable
DC cable
PC, etc.
DisplayPort Terminal
USB Terminal
AC adapter
17