Wiring Connection - JVC KW-M785BW Instruction Manual

Monitor with receiver
Hide thumbs Also See for KW-M785BW:
Table of Contents

Advertisement

Installation and Connection
Installation and Connection

Wiring connection

REMO-IN
10 A fuse
¥
Purple with white stripe
Light green
]
White
/ White with black stripe
]
Gray
/ Gray with black stripe
]
Green
/ Green with black stripe
]
Purple
/ Purple with black stripe
Orange with white stripe
Light blue with yellow stripe
Blue with white stripe (12 V
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire)
48
ENGLISH
Connect the antenna cord to the antenna terminal
USB terminal (1 m)
(USB1)5V
To the car's reverse lamp harness
REVERSE
when using the optional rear view camera
PRK SW
[
To front speakers (left) / Mid-range speakers (left) for 3-way crossover
[
To front speakers (right) / Mid-range speakers (right) for 3-way crossover
[
To rear speakers (left) / Tweeters (left) for 3-way crossover
[
To rear speakers (right) / Tweeters (right) for 3-way crossover
To the car light control switch
STEERING WHEEL
REMOTO INPUT
To the steering wheel remote control adapter (not supplied)
REMOTE CONT
350 mA)
To the power control terminal when using the optional power amplifier (Or)
ANT.CONT
P.CONT
To the control terminal of the motor antenna or to the power terminal for the booster amplifier of film-type antenna
"
Connect a USB device
1.5A
Extension wire ( ø )
To the car's parking brake detection switch harness
(For best safety, be sure to connect the parking sensor.)
Ignition key switch
Car fuse
Car battery
To the car chassis

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents