Before First Use; Daily Use - Electrolux EW6F1495FC User Manual

22 www.electrolux.com
display shows the text Hr for 2
seconds, 12 (thousands and
hundreds) for 2 seconds and 76 (tens
and units).
If the procedure does not
work (due to timeout, wrong
programme dial position or
wrong keys combination),
switch the appliance off and
repeat sequence from the
beginning.
10.5 Factory Reset
This function allows to restore the factory
default options. To activate this option
follow steps below:
1. Switch the appliance on by pressing
Marche/Arrêt button.

11. BEFORE FIRST USE

1. Make sure that the electrical power is
available and the water tap is open.
2. Pour a small quantity of detergent
into the compartment marked by
3. Set and start a programme for cotton
at the highest temperature without
any laundry in the drum.

12. DAILY USE

WARNING!
Refer to Safety chapters.
12.1 Activating the appliance
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Press the Marche/Arrêt button for a
few seconds to activate the
appliance.
A short tune sounds.
12.2 Loading the laundry
1. Open the appliance door.
2. Empty the pockets and unfold the
items before you put them in the
appliance.
3. Put the laundry in the drum, one item
at a time.
Do not put too much laundry in the drum.
2. Turn the programme knob to the
Synthétiques programme (3rd
position clockwise).
3. Press and hold the Gain de Temps
and Départ Différé buttons for some
seconds (within 10 seconds after the
switching on. After these 10 seconds,
the key combination activates and
deactivates the acoustic signals).
4. The display will show
about 5 seconds.
If the procedure does not
work (due to timeout, wrong
programme dial position or
wrong keys combination),
switch the appliance off and
repeat sequence from the
beginning.
This removes all possible dirt from the
drum and the tub.
.
4. Close the door firmly.
CAUTION!
Make sure that no laundry
gets caught between the
seal and the door to avoid
risk of water leakage and
damage to the laundry.
for