Table of Contents
Advertisement
2. Touch the Départ Différé button
repeatedly until the display shows the
desired delay time.
3. Touch the Départ/Pause
again to start the new countdown.
12.8 The SensiCare System
load detection
After touching the Départ/Pause
button:
1. The SensiCare System starts
estimating the weight of the load to
calculate the real programme
duration. During this phase the two
dots separating hours from minutes
are blinking.
2. After about 15-20 minutes new cycle
duration is displayed.
The appliance automatically adjusts
the programme duration to the load
to achieve perfect washing results in
the minimum possible time.
The SensiCare System is
not available with all
programmes such as : Laine
and programmes with short
cycles.
12.9 Interrupting a programme
and changing the options
When the programme is running, you
can change only some options:
1. Touch the Départ/Pause
The related indicator flashes.
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the Départ/Pause
again.
The washing programme continues.
To start the programme
again make sure that the
programme dial is correctly
positioned on the interrupted
programme and the indicator
of the Départ/Pause
button is flashing.
12.10 Cancelling a running
programme
1. Press the button Marche/Arrêt to
button
cancel the programme and to
deactivate the appliance.
2. Press the button Marche/Arrêt again
to activate the appliance.
There is also an alternative way of
cancelling:
1. Rotate the selector knob to the "Reset"
position
2. Wait for 1 second. The display shows
.
Now, you can set a new washing
programme.
12.11 Opening the door -
Adding garments
button.
While a programme or the delay start
operates, the appliance door is locked.
The display shows the indicator
1. Touch the Départ/Pause
button
In the display the related door lock
indicator goes off.
2. Open the appliance door. If
necessary, add or remove the items.
Close the door and touch the Départ/
Pause
If the SensiCare System has
completed and the water
filling has already started,
the new programme starts
without repeating the
SensiCare System. The
water and the detergent are
not drained out in order to
avoid waste.
.
If the temperature and level
of the water in the drum are
too high and/or the drum is
still rotating you should not
open the door.
button.
ENGLISH
25
.
button.
Advertisement
Table of Contents
