Advertisement

Quick Links

EW6F428WUC
EN
Washing Machine
User Manual

Advertisement

Table of Contents
loading

Summary of Contents for Electrolux EW6F428WUC

  • Page 1 EW6F428WUC Washing Machine User Manual...
  • Page 2: Table Of Contents

    16. ACCESSORIES....................33 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
  • Page 3: Safety Information

    ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
  • Page 4: Safety Instructions

    The appliance must be connected to the water mains • using the new supplied hose sets, or other new hose sets supplied by the Authorised Service Centre. Old hose sets must not be reused. • If the mains power supply cable is damaged, it must •...
  • Page 5: Installation

    ENGLISH access to the mains plug after the • Follow the safety instructions on the installation. detergent packaging. • Do not touch the mains cable or the • Do not put flammable products or mains plug with wet hands. items that are wet with flammable •...
  • Page 6 3.1 Unpacking 1. Remove the external film. If necessary, 2. Remove the cardboard top and the use a cutter. polystyrene packaging materials. 3. Open the door. Remove all the items from 4. Put the front polystyrene packaging the drum .
  • Page 7 ENGLISH 9. Remove the three transit bolts and pull out 10. Put the plastic caps, that you find in the the plastic spacers. user manual bag, in the holes. We recommend that you WARNING! keep the packaging and Do not put cardboard, wood the transit bolts for any or equivalent materials movement of the...
  • Page 8 1. Connect the water inlet hose to the 2. On the edge of a sink - Fasten the back of the appliance. guide to the water tap or to the wall. Make sure that the plastic guide cannot move when the...
  • Page 9: Product Description

    ENGLISH Make sure that the drain hose makes a The end of the drain hose loop to prevent particles going into the must always be ventilated , appliance from the sink. i.e. the inner diameter of the 6. Position the hose directly to a built-in drain pipe (min.
  • Page 10: Control Panel

    Transit bolts Hose support 5. CONTROL PANEL 5.1 Special features • Thanks to the Jemné+ option, the fabric softener is uniformly spread out Your new washing machine meets all in the laundry and deeply penetrates modern requirements for an effective...
  • Page 11 ENGLISH 5.3 Display Door locked indicator. Delay start indicator. The digital indicator can show: • Programme duration (e. g. • Delay time (e. g. • Cycle end ( • Warning code (e.g. Time Manager bars level indicator. Drum clean indicator. Child safety lock indicator.
  • Page 12: Dial And Buttons

    6. DIAL AND BUTTONS 6.1 Introduction for very delicate fabrics. The rinse phase uses more water for some The options/functions are washing programmes not available with all • Rinse Hold . The related indicator washing programmes. comes on. Check the compatibility The final spin is not performed.
  • Page 13 ENGLISH This option is recommended for When you set a washing programme, the heavily soiled laundry, especially if display shows the default duration and containing sand, dust, mud and other dashes. solid particles. Touch Time Manager button to reduce These options can increase the programme duration according to the programme duration.
  • Page 14: Programmes

    7. PROGRAMMES 7.1 Programme Chart Programme Maximum Maxi‐ Programme description Default tem‐ spin (Type of load and soil level) perature speed load Temperature Spin range speed range Bavlna 1200 rpm 8 kg White cotton and coloured cotton. Normal 40 °C 1200- 400 soil and light soil.
  • Page 15 ENGLISH Programme Maximum Maxi‐ Programme description Default tem‐ spin (Type of load and soil level) perature speed load Temperature Spin range speed range Přikrývka 800 rpm 3 kg Single synthetic blanket, padded clothes, 40 °C 800 - 400 duvets, down jackets and similar items. 60 °C - Cold 800 rpm 1 kg...
  • Page 16 Programme Maximum Maxi‐ Programme description Default tem‐ spin (Type of load and soil level) perature speed load Temperature Spin range speed range 1200 rpm Outdoor Do not use fabric softener and 1200- 400 30 °C make sure that there is no soften‐...
  • Page 17 ENGLISH Programme Maximum Maxi‐ Programme description Default tem‐ spin (Type of load and soil level) perature speed load Temperature Spin range speed range Denim 1200 rpm 3 kg Special programme for Denim clothing 30 °C 1200 - 400 with delicate washing phase to minimize 40 °C - Cold colour fading and marks.
  • Page 18: Settings

    Programme ■ ■ ■ ■ ■ Vlna Sport ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Outdoor Denim ■ ■ ■ ■ ■ ■ ■ 7.2 Woolmark Apparel Care - Company for the washing of wool garments labelled as «hand wash»...
  • Page 19: Before First Use

    ENGLISH The appliance will default to this option The Child Lock function is after you switch it off. not available for 8 seconds after switching on the appliance. 9. BEFORE FIRST USE 1. Make sure that the electrical power is This removes all possible dirt from the available and the water tap is open.
  • Page 20 10.3 Filling the detergent and additives Compartment for prewash phase, soak programme or stain remover. Compartment for washing phase. Compartment for liquid additives (fabric conditioner, starch). Maximum level for quantity of liq‐ uid additives. Flap for powder or liquid deter‐...
  • Page 21 ENGLISH desired delay time. On the display the indicator shows 2. Touch the Start/Pauza button. The appliance door locks and starts the countdown of the delay start. The display shows the indicator When the countdown is completed, the programme starts automatically. Cancelling the delay start after the countdown has started Make sure that the flap does not cause a...
  • Page 22 10.8 The SensiCare System There is also an alternative way of cancelling: load detection 1. Rotate the selector knob to the "Reset" position. After touching the Start/Pauza 2. Wait for 1 second. The display shows button: 1. The SensiCare System starts...
  • Page 23: Hints And Tips

    ENGLISH When you activate the • If you have set Night appliance again, the display appliance only drains the water shows the end of the The option indicator Rinse Hold previous programme. Turn disappears. the programme dial to set a 3.
  • Page 24: Care And Cleaning

    • Wash heavy soil stains with a special programmes (60 °C max) for all detergent. types of fabric, or special ones for • Be careful with curtains. Remove the woollens only. hooks and put the curtains in a • Do not mix different types of washing bag or pillowcase.
  • Page 25 ENGLISH Regularly examine the seal and remove CAUTION! all objects from the inner part. Do not use alcohol, solvents or chemical products. 12.5 Cleaning the drum CAUTION! Regularly examine the drum to prevent Do not clean the metal rust forming. surfaces with chlorine-based detergent.
  • Page 26 Use a small brush to clean the recess. 2. Remove the top part of the additive compartment to aid cleaning and flush it out under running warm 4. Insert the detergent drawer into the water, to remove any traces of guide rails and close it.
  • Page 27 ENGLISH Proceed as follows to clean the pump: WARNING! Make sure that the impeller of the pump can rotate. If it does not rotate, contact the Authorised Service Centre. Make sure also that you tighten the filter correctly to prevent leakages.
  • Page 28: Troubleshooting

    12.8 Cleaning the inlet hose and the valve filter 45° 20° 12.9 Emergency drain 3. Put the two ends of the inlet hose in a container and let the water flow out If the appliance cannot drain the water, of the hose.
  • Page 29 ENGLISH Pauza button may flash • - The mains supply is unstable. continuously: Wait until the mains supply is stable. • - No communication between • - The appliance does not fill electronic elements of the appliance. with water properly. Start the Switch it off and switch on again.
  • Page 30 Problem Possible solution • Make sure that the water tap is open. • Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority. The appliance does not • Make sure that the water tap is not clogged.
  • Page 31: Consumption Values

    ENGLISH Problem Possible solution • Make sure the levelling of the appliance is correct. Refer to "Installation instruction". The appliance makes • Make sure that the packaging and/or the transit bolts an unusual noise and are removed. Refer to "Installation instruction". vibrates.
  • Page 32: Technical Data

    Programmes Load Energy Water Approxi‐ Remain‐ (kg) con‐ con‐ mate pro‐ ing mois‐ sumption sumption gramme ture (%) (kWh) (litre) duration (minutes) Bavlna 60°C 1,35 Bavlna 40°C 0,87 Syntetika 40°C 0,60 Jemné 40°C 0,55 Vlna 30°C 0,30 Standard cotton programmes 0,96 Standard 60°C cotton...
  • Page 33: Accessories

    Read carefully the instructions supplied depth of your appliances. with the accessory. 16.4 Available in https://shop.electrolux.com.au/ or from authorised dealer Only appropriate accessories approved by ELECTROLUX ensure the safety standards of the appliance. If unapproved parts are used, any claims will be invalidated.
  • Page 34 17. ENVIRONMENTAL CONCERNS appliances marked with the symbol Recycle materials with the symbol with the household waste. Return the Put the packaging in relevant containers product to your local recycling facility or to recycle it. Help protect the contact your municipal office.
  • Page 35 ENGLISH...
  • Page 36 www.electrolux.com/shop...

Table of Contents