Guardall SecuRam BASIC Operating And Changing Instructions page 2

TO CHANGE CODE
Always perform operation with door open.
1. Enter "Zero" six times.
2. Enter your existing six (6) digit code once
a. (Factory setting 1 2 3 4 5 6)
3. Enter your NEW six (6) digit code twice
4. 2 BEEPS indicates code is accepted.
5. Test new code several times before closing the door.
VALID CODE ENTRY
code is accepted.
INVALID CODE ENTRY
wrong code has been entered. Old code is still valid.
WWW.GUARDALL.COM.AU
0 0 0 0 0 0
- 2 BEEPS at the end of code entry indicates
- 3 BEEPS at the end of code entry indicates
X X X X X X
X X X X X X / X X X X X X