General Introduction; Safety Precautions - Megger T 22/1 Instruction Manual

1

GENERAL INTRODUCTION

1.1

Safety Precautions

Each person involved in the assembly, maintenance, and
repair of this system is required to have read this manual
carefully.
At the time of supply, this set and its accessories are in line
with the state of the art in safety control. In their operation
there may be parts and places of the set, however, which
cannot be protected properly without unreasonably interfering
with their function and control. This is why comprehensive
personal experience in safety matters is vital for the protection
of both staff and equipment.
For this reason, always abide by the following safety
instructions!
GENERAL INSTRUCTIONS
Only trained and / or instructed staff are permitted to deal with
this set and its peripherals. Keep other persons away from it.
This manual shall be available to the supervising, operating,
and maintenance staff for reference.
Improper use may constitute a high risk of damage to the life
and health of the operator, the set and any equipment
connected to it as well as its efficient operation (UVV -
Prevention of Accidents Regulation). Use the set exclusively to
the purpose it has been designed for by its manufacturer.
Always use the appropriate tools for each operation and keep
your tools in good condition!
Constantly check the observance of all safety precautions
during operation and maintenance.
This set is allowed to be run by authorized staff with sufficient
expertise only.
Operate the set and its peripherals only when it is in a good
technical condition.
man_t22-1_en_04-4
11