Related Manuals for Megger TTR PC
Summary of Contents for Megger TTR PC
- Page 1 TTR PC Quick Start Guide 1) Connect Leads / Power / Ground Before After To Ground Source To High Voltage Primary Winding To Low Voltage Secondary/Tertiary Winding Example Using 1:1 Self Test: Revised 6/18/2014 Page 1...
- Page 2 TTR PC Quick Start Guide 2) Connect PC to TTR TTR 300 | TTR 310 C | TTR 310 (Serial) TTR 330 (Ethernet) NOT USB 3) Turn Instrument On – wait for Start-up Screen 4) Launch PowerDB 10.5 Lite (or Advanced/Pro)
- Page 3 TTR PC Quick Start Guide 6) Select Model from Dropdown Leave default values for TTR 320/330 ii) To ensure proper serial port connection when connecting to a TTR 300/310 (when using USB-to- Serial port adapter) follow these steps: a. Click Device Manager b.
- Page 4 TTR PC Quick Start Guide 8) Fill out the form REQUIRED RECOMMENDED Revised 6/18/2014 Page 4...
- Page 5 TTR PC Quick Start Guide 9) Left click to View/Change Settings LEFT CLICK EITHER TO SAVE 10) Run the Test LEFT CLICK TO START (PROCEED TO STEP 11 FOR TTR 300/310) VALUES FILLED IN FROM STEP 4 RECOMMENDED WITH 1:1 SELF TEST RATIO EXPECTED IS 1.000 AND PHASE DEVIATION IS +/- 3 MINUTES (.05 DEGREES)
- Page 6 TTR PC Quick Start Guide 11) Finish the Test LEFT CLICK TO FINISH Revised 6/18/2014 Page 6...
- Page 7 TTR PC Quick Start Guide 12) Save Results Type in File Name Here Once file is saved, file will automatically save after each test (without prompt) Revised 6/18/2014 Page 7...
Need help?
Do you have a question about the TTR PC and is the answer not in the manual?
Questions and answers