Smithco 31-185-A Parts & Service Operators
  1. Manuals
  2. Brands
  3. Smithco Manuals
  4. Paint Sprayer
  5. 31-185-A
  6. Parts & service operators

Smithco 31-185-A Parts & Service Operators

W/ 18'/20' boom
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Product Support:
Spray Star 300T
Base Model 31-300-A
31-185-A w/ 18' Boom
31-200-A w/ 20' Boom
Hwy SS & Poplar Ave; Cameron WI 54822
1-800-891-9435
Parts & Service
productsupport@smithco.com
Operators
SN PB-301

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 31-185-A and is the answer not in the manual?

Questions and answers

Related Manuals for Smithco 31-185-A

Summary of Contents for Smithco 31-185-A

  • Page 1 Parts & Service Operators Spray Star 300T Base Model 31-300-A 31-185-A w/ 18’ Boom 31-200-A w/ 20’ Boom SN PB-301 Product Support: Hwy SS & Poplar Ave; Cameron WI 54822 1-800-891-9435 productsupport@smithco.com...

  • Page 2: Table Of Contents

    CONTENTS Introduction ..........1-10 Introduction ...................1-7 Introduction .................. 1 Safe Practices ................2 Safety Warnings ................3 Safe Spraying Practices .............. 4 Specifications ................5 Setup ................... 6 Operation ..................7 Service ..................8-21 Maintenance ................8-11 Storage ..................12 Spraying Introduction ..............13 Turf Management ..............

  • Page 3: Introduction

    All Smithco machines have a Serial Number and Model Number. Both numbers are needed when ordering parts. Serial number tag is located on main frame in front of engine. For product and accessory information, help finding a dealer, or to register your product please contact us at www.Smithco.com.

  • Page 4: Safe Practices

    17. Stop engine before making repairs/adjustments or checking/adding oil to the crankcase. 18. Use parts and materials supplied by Smithco only. Do not modify any function or part. 19. Use caution when booms are down as they extend out beyond the center line of the machine.

  • Page 5: Safety Warnings

    SAFETY WARNINGS Read and understand this manual and all safety signs before operating and maintaining. Review the safety instructions and precautions annually. TAKE NOTE! THIS SAFETY ALERT SYMBOL FOUND THROUGHOUT THIS MANUAL IS USED TO CALL YOUR ATTENTION TO INSTRUCTIONS INVOLVING YOUR PERSONAL SAFETY AND THE SAFETY OF OTHERS.

  • Page 6: Safe Spraying Practices

    SAFE SPRAYING PRACTICES Persons engaged in the handling, preparation or application of chemicals must follow accepted practices to insure the safety of themselves and others, 1. WEAR protective clothing including: gloves, hat, respirator, eye protection and skin covering suitable for protection from chemicals being used.

  • Page 7: Specifications

    SPECIFICATIONS FOR SPRAY STAR 300T WEIGHTS AND DIMENSIONS Length 164" (416.56 cm) Width 88" (223.52 cm) Height w/ Booms Folded 136" (345cm) Wheel Base 74" (187.96 cm) Weight Empty 1315 lbs (596.5kg) ENGINE Make Briggs and Stratton Model# 19L237 Type / Spec# 0042-F1 Horsepower 10 hp (7.46 kW)

  • Page 8: Setup

    SETUP Battery not included. 1. Install an Automotive type 24F-12 Volt battery into the Power Box and secure with the battery hold- down. 2. Fill the fuel tank to bottom of neck. Check engine oil. 3. Check the tire pressure. The tires are 30 psi (2.0 bar). 4.

  • Page 9: Operation

    OPERATION Before operating the Spray Star 300T, become familiar with all controls and functions. Also complete all main- tenance requirements and read all safety warnings. Knowing the Spray Star 30T0 thoroughly, how it operates, and by doing the prescribed maintenance steps, you can expect trouble free operation for years to come. SAFETY Safety needs to always be the concern of the operator on a moving vehicle or any machine with moving parts.

  • Page 10: Service

    MAINTENANCE ENGINE Change and add oil according to temperature chart below. Do not overfill. Use a high quality detergent oil classified "For Service SF, SG, SH, SJ or higher" SAE 30 oil. Use no special additives with recommended oils. Do not mix oil with gasoline. SAE VISCOSITY GRADES SAE 30 10W-30 SW-30 5W-30...
  • Page 11 MAINTENANCE BATTERY Batteries normally produce explosive gases which can cause personal injury. Do not allow flames, sparks or any ignited object to come near the battery. When charging or working near battery, always shield your eyes and always provide proper ventilation. Battery cable should be disconnected before using “Fast Charge”.
  • Page 12 TANK AGITATION Before using the Spray Star, the operator and spray technician must familiarize themselves with all of the information on chemical spraying contained in the Turf Spray Guide. All testing and calibrating of sprayers is to be done with water, not chemicals. This insures the safety to all involved in performing the calibration operation.
  • Page 13 SPRAYER CLEANING One of the most common causes for faulty-pump performance is corrosion inside the pump. Flush the pump and entire system with a solution that will chemically neutralize the liquid pumped. Mix according to manufacturer’s directions. This will dissolve most residue remaining in the pump, leaving the inside of the pump clean for the next use.

  • Page 14: Storage

    STORAGE 1. Before storing clean machine thoroughly. 2. Check bolts and nuts, tighten as necessary. 3. Make all repairs that are needed and remove any debris. 4. Store in a clean and dry area. 5. Disconnect control cord on Radion computer to prevent unintended deployment. 6.

  • Page 15: Spraying Introduction

    This section is intended to offer practical guidelines for the distribution of liquid chemicals over an area of turf grass such as golf courses, park land, school grounds and lawns. SMITHCO makes no representation as to the suitability of any technique or product for any particular situation. This section is suitable for self-propelled spray vehicles or sprayers mounted onto vehicles.

  • Page 16: Turf Management

    TURF MANAGEMENT Turf management chemicals are made for four general purposes: 1. Fungicides: Prevent or cure fungus on turf grass. They are made in 2 general types: • Systemic - Chemicals enter the plant system and protect or cure it of, fungus. •...

  • Page 17: Nozzles

    NOZZLES NOZZLE SCREENS (STRAINERS) Smaller nozzles require nozzle screens or strainers to prevent clogging. • Teejet type nozzles size 8001 and 80015 require 100 mesh screens. • Teejet type nozzles from size 8002 through 8008 require 50 mesh screens. • Turbo TurfJet Nozzles Size 1/4 TTJ02-VS and larger do not require strainers. •...
  • Page 18 NOZZLES Always be alert to the possibility of a plugged or damaged nozzles. Serious misapplications may result. Check nozzle output periodically. Modern nozzles use spring and diaphragm check valves to insure positive cutoff of chemicals without drip. Snap-on caps make replacing and cleaning nozzles, quick, easy and fool proof with proper re-installation. An operator can see at a glance if all nozzles are the same size by the color code.

  • Page 19: Calibration Introduction

    CALIBRATION INTRODUCTION Calibrating simply means to adjust a set of variables on the sprayer in order to deliver the desired amount of chemical to a known area of turf. The job of calibrating the sprayer consists of balancing these variables so that your sprayer delivers the de- sired application rate.

  • Page 20: Nozzle Chart Method Of Calibration

    THE NOZZLE CHART METHOD OF CALIBRATION The Nozzle Chart Method is useful when the sprayer nozzles are new or nearly new. It is also the most use- ful method to employ when the sprayer is equipped with an Electronic Spray Control System. The Electronic Spray Control System does most of the calibration work, it is up to the operator to select the proper combina- tion of nozzle size and ground speed which will deliver the desired application rate.
  • Page 21 THE NOZZLE CHART METHOD OF CALIBRATION (CONTINUED) 5. For Sprayer with Electronic Spray Control Systems. On sprayers equipped with Electronic Spray Control Systems such as those manufactured by TeeJet, Raven Ind., and Micro-Trak Co., It is still important to select the right type and size of nozzle for the required operation.

  • Page 22: The "128" Method Of Calibration

    THE “128” METHOD OF BOOM SPRAYER CALIBRATION 2 Drive the sprayer through the measured distance discussed above at normal spraying speed, record the travel time required to cover the measured distance in seconds with a stopwatch. The carrying or towing vehicle is to be traveling at the desired speed when it crosses the start line of the measured course.

  • Page 23: Abbreviations And Conversions

    ABBREVIATIONS AND CONVERSIONS Gallons per minute Centimeters lit/min Liters per minute Decimeters dl/min Deciliter per minute Meter Pounds per square inch Millimeters Kilometers m.p.h. Miles per hour Gallon per acre km/h Kilometers per hour lit/ha Liters per hectare Volume per ACRE ml/ha Milliliter per hectare Volume per hectare...
  • Page 24 NOTES...

  • Page 25: Diagrams

    WIRING REF# PART# DESCRIPTION QUANTITY 14-673 Shut Off Valve 15-726 Lighted Switch 15-732 Rocker, Green 15-726 Lighted Switch 15-731 Rocker, Amber 15-727 Rocker, No Light 15-728 Centering Switch, Momentary, On-Off-On 15-727 Rocker, No Light 15-728 Centering Switch, Momentary, On-Off-On 30-214 Electric Boom Actuators 33-480 Pressure Switch...

  • Page 26: Parts

    MAIN DRAWING...
  • Page 27 MAIN DRAWING REF# PART# DESCRIPTION QUANTITY HNL-12-20 Replacement Lug Nut, 1/2 -20 31-328 Tire and Wheel 30-048-01 Tire, 29-14.00 x 15 31-328-02 Wheel 25-380 Decal, Tire Pressure, 30PSI 31-311 Axle 31-310 Mainframe 31-316 Hose Trough HB-38-16-100 Hex Bolt, 3/8 -16 x 1 HW-38 Flat Washer, 3/8 HNFL-38-16...

  • Page 28: Control Box

    CONTROL BOX DRAWING REF# PART# DESCRIPTION QUANTITY 15-732 Rocker, Green 15-731 Rocker, Amber 15-727 Rocker, Unlit 15-726 Lighted Switch, On-Off 15-728 Centering Switch, On-Off-On 15-729 Panel Mount, Middle 15-725 Panel Mount, End 31-325 Control Box 31-330 Decal, Control Box 31-324 Cord Grip Connector 31-322 41/2"...

  • Page 29: Engine Drawing

    ENGINE DRAWING REF# PART# DESCRIPTION QUANTITY 41-082 Engine, 10HP 31-320 Belt Guard mount 10-578 Pulley 15-124 Belt 31-319 Belt Guard HB-516-18-075 Hex Bolt, 5/16 - 18 x 3/4 78-274 Cage Nut, J-Type 16-998 Pump 18-372 3-Way Valve HB-38-16-275 Hex Bolt, 3/8 - 16 x 23/4 HWL-38 Lock Washer, 3/8 HMB-12-14...

  • Page 30: Spray Tank

    SPRAY TANK DRAWING...
  • Page 31 SPRAY TANK DRAWING REF# PART# DESCRIPTION QUANTITY 31-302 300 Gallon Poly Tank 16-945 Double Thread Fitting(Agitation bottom of tank) 16-194 Anti Vortex Fitting (bottom of tank) 31-327 Decal, Spray Star 300T 31-318 Tank Strap 16-220 Replacement Lid 14-365 Air Gap Filler 16-962 Coupler, 1"...

  • Page 32: Turbo Quad Agitator

    TURBO QUAD AGITATOR REF# PART# DESCRIPTION QUANTITY 18-510 Mini Eductor 16-288 Reducer, 16-158 Close Nipple, 16-157 Female Pipe Thread Tee, 16-72 Nylon Nipple, 3/4 NPT x 31/2 16-163 Reducer 16-945 Bulk Head Fitting 16-164 Elbow...

  • Page 33: 16-998 Hypro Pump

    16-998 HYPRO PUMP ® When servicing the spray pump or filter, all control valves must be shut off if there is liquid in the tank. REF# PART# DESCRIPTION QUANTITY 16-998-01 Drain Plug 16-998-02 Pump Casing Impeller Nut 16-966-16 Impeller 16-966-11 16-998-10 Gasket 16-998-04...

  • Page 34: Radion Plumbing

    RADION PLUMBING...
  • Page 35 RADION PLUMBING REF# PART# DESCRIPTION QUANTITY 16-194 Anti-Vortex Fitting (part of tank) 16-156 Elbow, 11/4 MPT x 11/4 HB 16-945 Double Thread Fitting 16-164 Elbow, 1MPT x 1 HB 8896-33 1" Discharge Hose x 33" 18-222 Hose Clamp 15-808 Hose Barb 14-673 Valve, Shutoff 15-740...

  • Page 36: Radion Wiring

    RADION WIRING If using Simulated Speed with a Radion 8140, one needs to change back to Ground Speed for proper rate control when spraying. REF# PART# DESCRIPTION QUANTITY Antenna 20-687-02 GPS Speed Sensor 20-697-01 Radion 8140 Console 31-222 Suction Cup Mount 20-697-02 Wire Harness 15-743...

  • Page 37: 20-785 Regulating Valve

    20-785 REGULATOR VALVE REF# PART# DESCRIPTION QUANTITY 20-785-01 Motor, 6RPM 15-552-24 Retaining Clip 15-552-25 Socket Head Cap Screw, Stainless Steel 15-552-26 Motor Adapter, Polypropylene 15-517-11 Thrust Washer, Teflon 15-552-27 Stem, Stainless Steel 15-552-05 O-ring, Viton 15-517-16 Body, Nylon Lock Nut, Stainless Steel Ball, Polypropylene 15-552-13 Gasket, Viton...

  • Page 38: 15-743 Manifold Ball Valve

    15-743 MANIFOLD BALL VALVE REF# PART# DESCRIPTION QUANTITY 15-552-23 Motor 15-878 Metri-Pack Cable (comes with motor) 15-552-24 Retaining Clip 15-552-25 Socket Head Cap Screw, Stainless Steel 15-552-26 Motor Adapter, Polypropylene 15-517-11 Thrust Washer, Teflon 15-552-27 Stem, Stainless Steel 15-552-05 O-ring, Viton 15-517-16 Body, Nylon Lock Nut, Stainless Steel...

  • Page 39: 15-737 Flanged Strainer

    15-737 FLANGED STRAINER REF# PART# DESCRIPTION QUANTITY 15-737-01 Strainer Head 75 Series 16-968-03 50 Mesh Strainer 16-968-05 80 Mesh Strainer 14-521-02 EPDM Gasket 14-521-03 Bowl 1" NPT 14-521-04 EPDM Rubber gasket 14-521-05 15-737 Flanged Strainer Assembly with 50 Mesh Screen...

  • Page 40: Accessories

    17-580 20' HEAVY BOOM...
  • Page 41 17-580 20' HEAVY BOOM REF# PART# DESCRIPTION QUANTITY 17-652 Left Boom Arm 17-631 V-Boom Nest 17-578 Boom Nest Post 30-214 10" Electric Hydraulic Actuator 30-184 Actuator Mount HN-38-16 Hex Nut, - 16 (adjustment Hex Bolt) HB-38-16-100 Hex Bolt, - 16 x 1 HW-38 Flat Washer, HNFL-38-16...
  • Page 42 17-580 20' BOOM DRAWING...
  • Page 43 17-580 20' BOOM PARTS LIST REF# PART# DESCRIPTION QUANTITY 17-636 Fresh Water Tank Mount HB-38-16-100 Hex Bolt, - 16 x 1 HNFL-38-16 Flange Whiz-loc Nut, - 16 HW-38 Flat Washer, 17-635 Clean Load Mount 8803-13 Black Trim, 13" HB-12-13-300 Hex Bolt, - 13 x 3 HNTL-12-13 Nylon Lock Nut,...

  • Page 44: 17-580 20' Hd Boom

    17-580 20' HD BOOM PLUMBING REF# PART# DESCRIPTION QUANTITY 18-417 Single Barb 9032-19 Black Hose, " x 19" 18-040 Hose Clamp 18-416 Double Barb 33-506 Nozzle body (see nozzle drawing) 18-415 " Hose Barb 9032-2.5 Black Hose " x 2 "...

  • Page 45: 17-585 18' Hd Boom

    17-585 18' HD BOOM PLUMBING REF# PART# DESCRIPTION QUANTITY 18-417 Single Barb 9032-19 Black Hose, " x 19" 18-040 Hose Clamp 18-416 Double Barb 33-506 Nozzle body (see nozzle drawing) 18-415 " Hose Barb 9032-2.5 Black Hose, " x 2 "...
  • Page 46 17-585 18' HD BOOM DRAWING...
  • Page 47 17-585 18' HD BOOM PARTS LIST REF# PART# DESCRIPTION QUANTITY 17-652 Left Boom Arm 18-297 Cap Plug 17-617 Boom Nest 17-578 Boom Nest Post 17-537 Square U-Hex Bolt 30-214 KYB Electric/ Hydraulic Actuator (includes * items) 30-184 Ram Mount HN-38-16 Hex Nut, - 16 ( for adjustment Hex Bolts)
  • Page 48 17-585 18' HD BOOM DRAWING...
  • Page 49 17-585 18' HD BOOM PARTS LIST REF# PART# DESCRIPTION QUANTITY 17-636 Fresh Water Tank Mount HB-38-16-100 Hex Bolt, - 16 x 1 HNFL-38-16 Flange Whiz-loc Nut, - 16 HW-38 Flat Washer, 17-635 Clean Load Mount 8803-13 Black Trim x 13" HB-12-13-300 Hex Bolt, - 13 x 3...

  • Page 50: 33-506 Standard Nozzle Drawing

    33-506 STANDARD NOZZLE ASSEMBLY REF# PART# DESCRIPTION QUANTITY 16-988 Cap Assembly 16-920-06 Diaphragm, EPDM Stainless Steel Screw Upper Clamp 16-920-03 O-ring Pivot Pin, Stainless Steel Turret, 3-Outlet, Nylon O-ring, EPDM Plug E-clip 33-538 Cap - White 33-554 Nozzle Tip - White (XR11008-VS) 16-800 Viton Gasket 16-802...

  • Page 51: Hose Reel Mount Drawing

    31-305/31-306 HOSE REEL MOUNT DRAWING REF# PART# DESCRIPTION QUANTITY HB-516-18-075 Hex Bolt, 5/16-18-3/4 HNFL-516-18 Flange Whiz-loc Nut, 5/16 -18 31-315 Hose Reel Plate 31-333 RH Leg 31-336 Leg Brace HB-38-16-075 Hex Bolt, 3/8 - 16 x 3/4 HNFL-38-16 Flange Whiz-loc Nut, 3/8 - 16 HB-38-16-300 Hex Bolt, 3/8 -16 x 3 HNFL-38-16...

  • Page 52: 31-306 Electric Hose Reel

    31-306 ELECTRIC HOSE REEL DRAWING...
  • Page 53 31-306 ELECTRIC HOSE REEL PARTS LIST REF# PART# DESCRIPTION QUANTITY 16-906-25 Retaining Ring 16-906-22 Axle Assembly HB-38-16-100 Hex Bolt, - 16 x 1 HW-38 Flat Washer, 16-906-27 Trim, Drum Edge 16-906-21 Drum Center 13-750 Solenoid HB-14-20-075 Hex Bolt, - 20 x HWL-14 Lock Washer, HN-14-20...
  • Page 54 ELECTRIC HOSE REEL WIRING DIAGRAM REF# PART# DESCRIPTION QUANTITY Battery 8975 Circuit Breaker 8977 Circuit Breaker Boot Red Wire, Switch to Solenoid Hot Terminal 33-251 Push Button Switch Red/White Wire, Switch to Solenoid Start Terminal 13-750 Solenoid HN -516-24 Hex Nut , - 24 HN -10-32 Hex Nut, 10 - 32...

  • Page 55: 31-305 Manual Hose Reel

    31-305 MANUAL HOSE REEL DRAWING REF# PART# DESCRIPTION QUANTITY 16-129-11 Disc, 17 " 16-906-25 Retaining Ring 16-906-22 Axle Assembly HB-38-16-100 Hex Bolt, - 16 x 1 HW-38 Flat Washer, 16-906-27 Trim, Drum Edge 16-906-21 Drum Center 16-906-20 Disc 17 ", Crank Side HWL-516 Lock Washer, HB-516-18-075...

  • Page 56: 31-304 Foam Marker

    31-304 FOAM MARKER DRAWING FOAM MARKER WIRING DRAWING...
  • Page 57 31-304 FOAM MARKER PARTS LIST REF# PART# DESCRIPTION QUANTITY 14-291-02 Foamer Tank 14-291-04 Tank Bracket HN-14-20-075 Hex Bolt, -20 x HBFL-14-20 Flange Lock Nut, 31-338 Foamer Plate HN-14-20-075 Hex Bolt, -20 x HBFL-14-20 Flange Lock Nut, HW-14 Flat Washer, 31-339 Mount Leg 1 HN-14-20-075 Hex Bolt,...
  • Page 58 31-304 FOAM MARKER DRAWING...
  • Page 59 INSTALLATION INSTRUCTIONS Safety: Before working on machine stop engine, set park brake, remove key from ignition and block wheels. Disconnect negative (-) battery terminal. 1. Drill & tap mainframe. Position the supplied template (Ref. A) as illustrated. Space the template 1" from the inside edge of the Mainframe to the edge of the template.
  • Page 60 REMOTE FLOW REGULATOR VALVE This allows you to place a flow valve at driver position so you can regu- late the foamer without getting off the machine. When using this you will remove the flow valve from the tank cap and move to the front of the ma- chine.
  • Page 61 FLOW REGULATOR VALVE REF# PART# DESCRIPTION QUANTITY Flow Regulating Valve 14-699 Male Coupling 15-507 Tubing 20-769 Regulating Valve Bracket 14-702 Red Washer 14-291-09 Replacement Blue Wing Nut...
  • Page 62 14-291 FOAM MARKER DRAWING REF# PART# DESCRIPTION QUANTITY 15-507 Foamer Tubing 14-291-02 Tank 14-291-01 Black Cover 14-536 Compressor Complete 14-284-02 Cap Assembly 14-291-04 Tank Bracket 14-291-05 Switch Box 15-511 Foam Nozzle 15-510-01 Nozzle Mounting Rod 16-987 Foam Nozzle Mounting Kit 14-284-05 Extension Wire...

  • Page 63: 15-505 Motor Sub Assembly

    15-505 MOTOR SUB ASSEMBLY DRAWING REF# PART# DESCRIPTION QUANTITY 1† Bolt Head Exhaust Manifold Gasket Exhaust Manifold 5† Manifold Screw 6† Diaphragm 7† Piston Brush Retainer 15-505-06 Brush 15-505-07 12 Volt Electric Motor 15-505-05 Stainless Steel Bearing Block Cover Cover Screw Exhaust Reed Valve 16*†...

  • Page 64: 14-291 Foamer Replacement Parts

    14-291 FOAMER REPLACEMENT PARTS...
  • Page 65 14-291 FOAMER REPLACEMENT PARTS REF# PART# DESCRIPTION QUANTITY 14-291-01 Black Cover 14-291-08 White Fly Nut 14-291-09 Blue Fly Nut 14-284-10 Tubing Connector 14-291-17 M6 Tubing Connector 14-536 Compressor Complete 14-291-11 Diaphragm Replacement Kit 15-505-08 Brush Retainer 15-505-06 Brush 15-505-07 12V Electric Motor 15-511-02 Foam Sponge 14-284-02...

  • Page 66: 14-515/15-618 Water Meter Kit

    14-515 WATER METER KIT (GALLONS) 15-618 WATER METER KIT (LITERS) REF # PART # DESCRIPTION QUANTITY 14-524 Filler Outlet 14-514 Water Meter (Gallons) 14-527 Water Meter (Liters) 14-525 Filler Inlet 16-962 1" Quick Coupler (already on machine) 16-961 1" Adapter Quick Coupler (already on machine) 16-851 1"...

  • Page 67: 30-006 Fresh Water Tank

    30-006 FRESH WATER TANK - REAR MOUNT REF# PART# DESCRIPTION QUANTITY 10-234 Wash Tank 16-158 Close Nipple 16-151 Elbow 16-960 Spigot HB-516-18-075 Hex Bolt, - 18 x HWL-516 Lock Washer, HW-516 Flat Washer, 1. Fresh Water Wash Tank mounts on the rear of all the machines. 2.

  • Page 68: 31-303 Chemical Cleanload

    31-303 CHEMICAL CLEANLOAD DRAWING DIAGRAM #1...
  • Page 69 31-303 CHEMICAL CLEANLOAD PART LIST REF# PART # DESCRIPTION QUANTITY 16-945 Double Thread Fitting 16-159 Straight Fitting, 1 x 1 18-116 Hose Clamp 9024 Clamp Cover 17-635 Clean Load Mount (comes with boom) 15-620 Cleanload Assembly 25-389 Decal, Tank Lid HB-516-18-075 Hex Bolt, - 18 x...
  • Page 70 OPERATING INSTRUCTION SHUT SPRAY TANK LID STARTUP 1. All Cleanload valves must be closed prior to starting: inlet ball valve, knife valve and hopper rinse ball valve. 2. Open lid to check for foreign objects which may hinder performance or contaminate the system. 3.
  • Page 71 TROUBLESHOOTING...

  • Page 72: 16-620 Cleanload Replacement Parts

    15-620 CHEMICAL CLEANLOAD DRAWING ®...
  • Page 73 15-620 CHEMICAL CLEANLOAD PARTS LIST ® REF# PART# DESCRIPTION QUANTITY 15-620-21 Tank Screw, #6 x 1” 15-620-02 Tank Lid 15-620-22 ProClean Container Nozzle 15-620-23 ProClean Push Valve Assembly 15-620-19 Tank Rinse 15-620-20 Gasket, 1” 1/2 x 1/2 FNPT Coupler 1/2 x 1/2 Thread Nipple ProClean Tank Wash Nozzle Splash Retainer O-ring Breather...

  • Page 74: Reference

    2006/42/EC Annex II 1A: 10 2006/42/EC Annex II 1A: 2 Dawn Bryngelson John Moore Sales, Director, Owner Technical Documentation Advisor Smithco West Inc. Moore Turf Care 200 West Poplar Avenue Thieplatz 4 Cameron, WI 54822 USA 49583 Lienen Germany 18-Mar-22...
  • Page 75 30 days from discovery of the condition. If you need help locating an Authorized Smithco Distributor, or if you have questions regarding your warranty rights or responsibilities, you may contact us at: Smithco Product Support Department 200 West Poplar Ave.
  • Page 76 This warranty does not apply to normal “wear and tear” items. Normal “Wear and Tear” includes, but is not limited to, damage to seats due to wear or abrasion, worn painted surfaces, scratched decals or windows, etc. Smithco may require the return of failed parts or components in order to determine the validity of any warranty claim.

This manual is also suitable for:

31-300-aSpray star 300t31-200-aSn pb-301

Table of Contents