Advertisement
INSTALLATION
• Remove all packaging material before using the refrigerator. This includes the foam
base and all adhesive tape holding the refrigerator accessories inside and outside.
• Clean both the inside and outside of the refrigerator with a damp cloth. A small amount
of neutral detergent can be added to warm water to wash the cloth and continue
wiping the appliance with clean water.
• Locate an independent, properly grounded power outlet which does not share a multi-
purpose socket with other electrical appliances.
• Do not connect a separate grounding wire. The grounding pole of the power plug will
provide adequate and reliable grounding.
Transportation
• Do not invert, apply pressure to the sides of or excessively vibrate the unit. When
moving, the tilt angle cannot exceed 45 degrees.
• Do not attempt to move the unit by the doors.
Placement
• Ensure proper air circulation around the refrigerator. Do not place the unit near heat
sources, direct sunlight, moisture or water.
• Install the refrigerator on solid, level flooring.
Notes:
• Do not allow the refrigerator any or other heavy object to be placed on the power
cable, as damaging the cable may present an electrical hazard.
• Before connecting the appliance to power, please check the voltage rating of
refrigerator and power supply carefully.
9
Advertisement
