Installation - Kogan KA92WCFREZA User Manual

•
Do not store beer, beverages or other fluids contained in bottles or enclosed
containers in the freezer compartment, as the bottles may crack due to the freezing
process.
•
When the freezer is being disposed of, the doors should be removed and the power
cord should be cut.

INSTALLATION

Placement
Before use, remove all packaging materials, including the bottom cushions, foam pads and
tape from inside the freezer. Remove any protective films on the doors and body.
Place the freezer in a location away from heat and direct sunlight. Do not place the freezer in
a moist or watery location to prevent rust.
Ensure the freezer is placed on a stable, flat surface. Make sure the unit cannot be rocked
side to side, back and forth or diagonally.
Ensure there are at least 20cms of space above the top of the freezer, plus at least 40cm of
space to each side and 15cm behind the unit to allow for the dissipation of heat.
Door Space Requirements
The unit's door must be able to open fully as shown.
W x D = 800mm x 780mm