Advertisement
Important!
• For all electrical connections carefully follow the instructions given in this user guide.
• Unpack the appliance, inspect all wiring and components for any signs of damage. If
so, do not connect the appliance and contact help.Kogan.com for support.
• After unpacking, it is recommended to wait at least 4 hours before connecting the
appliance to power. This allows the oil to settle back in the compressor.
• Ensure adequate air circulation is around the appliance. Failure to do so leads to
overheating. To achieve sufficient ventilation, follow the instructions in the "Installation"
section.
• To prevent possible burns, wherever possible the spacers of the product should be
against a wall to avoid touching any warm parts (compressor, condenser).
• The appliance must not be located close to radiators, cookers or other sources of heat.
• Ensure there is enough room behind the appliance to allow adequate access to power
plug and electrical outlet.
Service
• Any electrical work required for the servicing of the appliance should be carried out by a
qualified electrician or authorised representative of Kogan.com.
• This product must be serviced by an authorised service centre and only genuine spare
parts must be used.
Energy saving
• Don't place hot food in the appliance.
• Don't pack food too closely together as this prevents air circulation.
• Ensure food does not touch the back of the compartments.
• In the event of a power outage, avoid opening the doors.
• Do not open the doors frequently.
• Do not keep the doors open for an extended time.
• Do not set the thermostat to exceeding cold temperatures.
• All accessories, such as drawers, shelves and racks, should be kept in their intended
positions.
6
Advertisement
