Important Tips; Getting Started; What's In The Box - Zendure SolarFlow ZDSPVH1200 User Manual

4. Important Tips

The solar PV system is grid-tied. Please check if it is allowed in your
√
area. Depending on the region,official approval may be required
√
√
√
before or after installation.
√
Smart PVHub and AB1000 should be protected from direct sunlight to
prevent rapid temperature increase.
Please check the accessories before installation, some accessories
€ need to be purchased separately.
After the installation, please first download the Zendure App to
check electricity produced and set the power to the microinverter.
After SolarFlow installation, it will take about 5 minutes before it can
be connected to the grid, and the data will be synchronized to the
Zendure App within 20 minutes.
Before setting the output to microinverter, please confirm the rated
power of your microinverter, the output to microinverter should not
!
be greater than the rated power of your microinverter.
Please turn off the device（press and hold the IOT button on Smart
PVHub for 6 seconds ）before removing or installing battery AB1000.

5. Getting Started

5.1 What's in The Box

1 * Smart PVHub
6 * Mounting Screws
M4.7 * 39mm
1. Solar Cable: Used for solar panels connection.
2. Battery Cable: Used for AB1000 connection.
3. Microinverter Cable: Used for microinverter connection
4. Mounting Screws: Hooking up PVHub and Microinverter
5. Flat Washeret: used to fixed the micro-inverter
4 * Solar Cable 3m
1 * Aerial
1 * Battery Cable 2 * Microinverter
1.5m
2 * Flat
Washeret
EN
Cable 0.6m
User Manual
5