Table of Contents
Advertisement
Available languages
Available languages
EN
PVHub & AB1000 Hardware Reset
PVHub & AB1000 OTA
Tips:
• Choose one of bluetooth or WIFI, WIFI is preferred .
5.3 Installation
• If you wish to verify and commission your solar system immediately,
complete the installation when the weather is sunny.
• It is recommended that at least two people participate in the installation.
5.3.1 Installation Steps Overview
A. Disconnect the solar panel,micro-inverter and the home grid
B. Install Smart PVHub
C. Install Smart microinverter
D. Find a place to stack AB1000
E. Connect the top one AB1000 to the smart PVHub
F. Connect the microinverter to home grid
G. Connect the solar panel to the smart PVHub
H. Scan the QR code and download the Zendure app. Follow the
instructions of the app to set up device.After 20 minutes, you will get
the SolarFlow power storage system's data on your Zendure app.
Tips:
According to the government's regulations and to ensure safety, the
microinverter can only start working after connecting to a powered grid
for 5 minutes. To improve the accuracy of the data, the system will verify
and validate it for 15 minutes before showing it on the app.
Whether connecting or disconnecting Smart PVHub and AB1000,
photovoltaic panels or micro inverters, please make sure SolarFlow is
turned off by long-pressing the IoT button for 6 seconds.
5.3.2 Installation Tools
Tips:
Before installation, please check all accessories and prepare the
following tools (tools are not included in the purchase )
Phillips Screwdriver
Electric Drill
8
Press and hold the
iot button 10 seconds
Download the
Zendure App
to OTA
Hexagon Wrench
Marker Pen
/
PVHUb OTA
:PVHub
indicator
flashes green
AB1000 OTA:
AB1000
indicator
flashes green
Work Gloves
Tape Measure
- Quick Links:
- Installation
Hide quick links:
Advertisement
Chapters
Table of Contents
