Set Tcp/Ip Address - Dräger REGARD 3900 Operating Instructions Manual

Configuration
3.3

Set TCP/IP address

1. Click the button Set Communication.
A new window opens.
2. In the pop up window you can set the specified settings for the TCP/IP communication.
NOTICE
i i
Changing any other setting may affect the operation of the unit.
NOTICE
i
i
Every change at the pre-configured setting assumes in depth knowledge of the TCP/
IP communication. If any changes are made other than those described in this manual
it is NOT possible to give any kind of support to the gateway and its settings.
20 Dräger REGARD 3900 Modbus TCP/IP Gateway