LONGER RAY5 User Manual
Rotary roller
Hide thumbs
Also See for RAY5:
- User manual (43 pages) ,
- User manual (47 pages) ,
- Quick start manual (2 pages)
Related Manuals for LONGER RAY5
Summary of Contents for LONGER RAY5
- Page 1 Shenzhen Longer 3D Technology Co., Ltd RAY5 Rotary Roller User Manual V1.0 support@ longer3d.com...
-
Page 2: Table Of Contents
1) GRBL Software Installation and Use ....... 3 2) LightBurn Software Installation and Use ......6 4. Use of RAY5 Rotary Roller ..........9 1) Introduction to the Structure of the Roller ..... 9 2) Adjust the Spacing of the Roller ........10 3) Connect the Motor Cable .......... -
Page 3: Security Statement
1) Security of Laser LONGER RAY5 Rotary Roller used with RAY5 laser engraver is Level 4 laser product. The power of laser head is high, it may cause injury of the eye and skin burning. -
Page 4: Security Of Material
4) Security of Operational safety The RAY5 Rotary Roller can only run on a horizontal plane, and make sure that the roller must be firmly fixed to avoid fire caused by falling or moving during operation. -
Page 5: Install The Software
3. Install the Software The RAY5 Rotary Roller can replace the Y-axis and coordinate with the X- axis to complete the engraving of rotating objects. The roller adopts a 6- level adjustable structure design, which can be used for engraving of rotating objects with a diameter of 16-200mm. - Page 6 FINISH to complete and start the software. Set the GRBL software After installing laserGRBL, connect the laser engraver and computer via USB cable, power up the RAY5, press the power switch button. Then select correct port depending on the type of controller board this port may appear in the computer’s...
- Page 7 Shenzhen Longer 3D Technology Co., Ltd Click the Grbl, and select the Grbl Configuration；Find the $101(Y- axis travel resolution)，select the value and set it to 56.00 for RAY5, click the Write Close to finish the configuration.
-
Page 8: Lightburn Software Installation And Use
Shenzhen Longer 3D Technology Co., Ltd 2) LightBurn Software Installation and Use Double-click installation file (can downloaded from https://lightburnsoftware.com), select the installation directory, click NEXT and Install, wait for the software installation, then click FINISH complete and start the software. - Page 9 Next; select Front Left as your Origin X,Y, then click Nextand Finish button. After installing LightBurn, connect the laser engraver and computer via USB cable, power up the RAY5, press the power switch button. Then select correct...
- Page 10 Shenzhen Longer 3D Technology Co., Ltd 56.000 Click Edit, select Machine Settings, Click Outputs setup to expand hidden parameters, find the Y steps per mm ($101) set it to 56.00 for RAY5, click OK to finish the configuration.
-
Page 11: Use Of Ray5 Rotary Roller
It may take multiple times to reach the exact setting. The new value = 50*Previous value/ the actual Y-axis travel length 4. Use of RAY5 Rotary Roller 1) Introduction to the Structure of the Roller ... -
Page 12: Adjust The Spacing Of The Roller
Shenzhen Longer 3D Technology Co., Ltd 2) Adjust the Spacing of the Roller The rollers is designed with 6 different gaps that can be adjusted to suit 6-200mm diameter objects for engraving. The corresponding spacings for different gap numbers are as follows:... -
Page 13: Connect The Motor Cable
There are 2 types of Y-axis motor extension cables with different line sequences in the package. One of the cables has both white plugs which is used for RAY5, the other cable has black terminals which is for motor with different line sequence. Plug for motor cable Plug for roller motor... -
Page 14: Precautions For Roller Use
4) Precautions for Roller Use The rollers of RAY5 Rotary Roller need to be parallel with the X axis engraver，and the rotary roller be must level and stable, and can not have any object under the roller. ...