Table of Contents
Advertisement
Intended use
The unit is only to be used for its intended purpose. This
means:
•
for heating.
•
for cooling.
The unit may be operated only within its technical
parameters.
"Technical data" on page 19
Disclaimer
The manufacturer is not liable for any damage or loss-
es resulting from use of the unit which is not its intend-
ed use.
The manufacturer's liability also expires:
•
if work is carried out on the unit and its compo-
nents contrary to the instructions in this operat-
ing manual.
•
if work is improperly carried out on the unit and
its components.
•
if work is carried out on the unit which is not de-
scribed in this operating manual, and this work
has not been explicitly approved by the manufac-
turer in writing.
•
if the unit or components in the unit have been
altered, modified or removed without the explicit
written consent of the manufacturer.
EC conformity
The unit bears the CE marking.
"Declaration of conformity" on page 34.
4
Safety
The unit is safe to operate for its intended use. The con-
struction and design of the unit conform to current state
of the art standards, all relevant DIN/VDE regulations
and all relevant safety regulations.
Every person who carries out work on the unit must
have read and understood the operating manual before
starting any work. This also applies if the person con-
cerned has already worked with such a unit or a similar
unit or has been trained by the manufacturer.
Every person who carries out work on the unit must
comply with the relevant local accident prevention and
safety regulations. This applies in particular to the wear-
ing of personal protective clothing.
DANGER!
Risk of fatal electric shock!
All electrical connection work must be car-
ried out by qualified electricians only.
Before opening the unit, disconnect the
system from the power supply and prevent it
from being switched back on!
WARNING!
Qualified personnel only (qualified heating,
cooling or refrigeration engineer or electri-
cian) may carry out work on the unit and its
components.
Customer service
For technical information please contact your qualified
tradesman or the manufacturer's local partner.
We reserve the right to modify technical specifications without prior notice.
Advertisement
Table of Contents
